OpenLegislation

Division 4.4

United Kingdom

Original text. Later amendments are not shown.

The front member shall be strain gauged to measure bending moments in three positions, as shown in Figure 4a, each using a separate channel. The strain gauges are located on the impactor on the back of the front member. The two outer strain gauges are located 50 ± 1 mm from the impactor's symmetrical axis. The middle strain gauge is located on the symmetrical axis with a ± 1 mm tolerance.

Notes on Annex

Editorial notes

X1

Substituted by Corrigendum to Commission Decision 2004/90/EC of 23 December 2003 on the technical prescriptions for the implementation of Article 3 of Directive 2003/102/EC of the European Parliament and of the Council relating to the protection of pedestrians and other vulnerable road users before and in the event of a collision with a motor vehicle and amending Directive 70/156/EEC (Official Journal of the European Union L 31 of 4 February 2004).