# Commission Decision of 23 December 2003 on the technical prescriptions for the implementation of Article 3 of Directive 2003/102/EC of the European Parliament and of the Council relating to the protection of pedestrians and other vulnerable road users before and in the event of a collision with a motor vehicle and amending Directive 70/156/EEC (notified under document number C(2003) 5041) (Text with EEA relevance) (2004/90/EC), Division 1: General

Extent: E+W+S+N.I.

When performing measurements on a vehicle as described in this Part, the vehicle should be positioned in its normal ride attitude as described in point 2.3. If the vehicle is fitted with a badge, mascot or other structure which would bend back or retract under a low applied load, then such a load shall be applied before and/or while these measurements are taken. Any vehicle component which could change shape or position, such as ‘pop-up’ headlights, other than suspension components or active devices to protect pedestrians, shall be set to a shape or position that the test institutes, in consultation with the manufacturer, consider to be the most appropriate while taking these measurements.

---
Source: https://www.legislation.gov.uk/eudn/2004/90/annex/part/I/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2004-90/annex/part-I/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.