# Commission Decision of 23 December 2003 on the technical prescriptions for the implementation of Article 3 of Directive 2003/102/EC of the European Parliament and of the Council relating to the protection of pedestrians and other vulnerable road users before and in the event of a collision with a motor vehicle and amending Directive 70/156/EEC (notified under document number C(2003) 5041) (Text with EEA relevance) (2004/90/EC), Division 2.8

Extent: E+W+S+N.I.

‘1 000 mm wrap around distance’ is the geometric trace described on the frontal upper surface by one end of a 1 000 mm long flexible tape, when it is held in a vertical fore and aft plane of the car and traversed across the front of the bonnet and bumper. The tape is held taut throughout the operation with one end held in contact with the ground, vertically below the front face of the bumper and the other end held in contact with the frontal upper surface (see Figure 3). The vehicle is positioned in the normal ride attitude.
Similar procedures shall be followed, using alternative tapes of appropriate lengths to describe 1 500 and 2 100 mm wrap around distances.

---
Source: https://www.legislation.gov.uk/eudn/2004/90/annex/part/I/division/2/division/2.8 (the official version)
Page: https://openlegislation.uk/eu-decision-2004-90/annex/part-I/division-2/division-2.8
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.