# Commission Decision of 23 December 2003 on the technical prescriptions for the implementation of Article 3 of Directive 2003/102/EC of the European Parliament and of the Council relating to the protection of pedestrians and other vulnerable road users before and in the event of a collision with a motor vehicle and amending Directive 70/156/EEC (notified under document number C(2003) 5041) (Text with EEA relevance) (2004/90/EC), Division 2.2.4.1


The impactor, including foam covering and skin, shall be suspended horizontally by three wire ropes of 1,5 ± 0,2 mm diameter and of 2,0 m minimum length, as shown in Figure 5a. It shall be suspended with its longitudinal axis horizontal, with a tolerance of ± 0,5°, and perpendicular to the direction of the certification impactor motion, with a tolerance of ± 2°. The impactor shall have the intended orientation about its longitudinal axis, for the correct operation of its knee joint, with a tolerance of ± 2°. The impactor must meet the requirements of point 3.4.1.1, Chapter II of Part II with the attachment bracket(s) for the wire ropes fitted.

---
Source: https://www.legislation.gov.uk/eudn/2004/90/attachment/1/division/2./division/2.2./division/2.2.4/division/2.2.4.1. (the official version)
Page: https://openlegislation.uk/eu-decision-2004-90/attachment-1/division-2./division-2.2./division-2.2.4/division-2.2.4.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.