Article 1 F1

The use of the following methods is authorised for grading pig carcasses pursuant to point 1 of Section B.IV of Annex IV to Regulation (EU) No 1308/2013 of the European Parliament and of the Council ^f1 in Poland:

1. (a)

   the ‘ Capteur Gras/Maigre — Sydel (CGM) ’ apparatus and the assessment methods related thereto, details of which are given in Part 1 of the Annex;

2. (b)

   the ‘ Ultra FOM 300 ’ apparatus and the assessment methods related thereto, details of which are given in Part 2 of the Annex;

3. (c)

   the ‘ Fully automatic ultrasonic carcass grading (Autofom) ’ apparatus and the assessment methods related thereto, details of which are given in Part 3 of the Annex;

4. (d)

   the ‘ IM-03 ’ apparatus and the assessment methods related thereto, details of which are given in Part 4 of the Annex;

5. (e)

   the ‘ Autofom III ’ apparatus and the assessment methods related thereto, details of which are given in Part 5 of the Annex;

6. (f)

   the ‘ CSB Image-Meater (CSB) ’ apparatus and the assessment methods related thereto, details of which are given in Part 6 of the Annex;

7. (g)

   the ‘ Fat-O-Meater II (FOM II) ’ apparatus and the assessment methods related thereto, details of which are given in Part 7 of the Annex;

8. (h)

   the ‘ manual method (ZP) ’ and the assessment methods related thereto, details of which are given in Part 8 of the Annex;

9. (i)

   the ‘ gmSCAN ’ apparatus and the assessment methods related thereto, details of which are given in Part 9 of the Annex;

10. (j)

    the ‘ ESTIMEAT ’ apparatus and the assessment methods related thereto, details of which are given in Part 10 of the Annex;

11. (k)

    the ‘ MEAT3D ’ apparatus and the assessment methods related thereto, details of which are given in Part 11 of the Annex.

As regards the apparatus ‘ Ultra FOM 300 ’ , referred to in point (b) of the first subparagraph, after the end of the measurement procedure it must be possible to verify on the carcass that the apparatus measured the values of measurement F1 and F2 on the site provided for in the Annex, Part 2, point 3. The corresponding marking of the measurement site must be made at the same time as the measurement procedure.

The manual method ZP, referred to in point (h) of the first subparagraph, shall only be authorised for abattoirs having a slaughter line with a capacity to process no more than 40 pigs per hour.