# Commission Decision of 4 July 2005 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards cold storage building kits and cold storage building envelope kits (notified under document number C(2005) 1961) (Text with EEA relevance) (2005/484/EC), Division: Systems of attestation of conformity

Extent: E+W+S+N.I.

For the product(s) and intended use(s) listed below, European Organisation for Technical Approval (EOTA) is requested to specify the following system(s) of attestation of conformity in the relevant guideline for European technical approvals:
System 1: see Directive 89/106/EEC, Annex III.2, point (i), without audit-testing of samples.
Product(s)
Intended use(s)
Level(s) or class(es)(reaction to fire)
Attestation of conformity system(s)
Cold storage building kits and cold storage building envelope kits
In building works
—
1
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Document). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

---
Source: https://www.legislation.gov.uk/eudn/2005/484/annex/II/division/2/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2005-484/annex-II/division-2/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.