# Commission Decision of 20 March 2006 on the detailed technical requirements for carrying out the tests specified in Directive 2005/66/EC of the European Parliament and of the Council relating to the use of frontal protection systems on motor vehicles (notified under document number C(2006) 776) (Text with EEA relevance) (2006/368/EC), Division 4.3

Extent: E+W+S+N.I.

The direction of impact must be parallel to the longitudinal axis of the frontal protection system as mounted on the vehicle or test frame, with the axis of the upper legform vertical at the time of the first contact. The tolerance to these directions is ± 2 °. At the time of first contact the impactor centre line must be coincident with the selected test point with a ± 10 mm tolerance both laterally and vertically.

---
Source: https://www.legislation.gov.uk/eudn/2006/368/annex/chapter/IV/division/4/division/4.3 (the official version)
Page: https://openlegislation.uk/eu-decision-2006-368/annex/chapter-IV/division-4/division-4.3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.