Skip to content

OpenCommons.ukCharities · Interests · Companies · Postcodes · Properties · Legislation

OpenCommons

OpenCommons
Charities
Interests
Companies
Postcodes
Properties
Legislation

OpenLegislation

OpenLegislation
Commission Decision of 20 March 2006 on the detailed technical requirements for carrying out the tests specified in Directive 2005/66/EC of the European Parliament and of the Council relating to the use of frontal protection systems on motor vehicles (notified under document number C(2006) 776) (Text with EEA relevance) (2006/368/EC)
Annex
Part II
Chapter IV
Division 5

Division 5.7

United Kingdom

Original text. Later amendments are not shown.

The length between the load transducer centrelines must be 310 ± 1 mm and the front member diameter must be 50 ± 1 mm.

← Division 5.6

Division 5.7

Legislation: Commission Decision of 20 March 2006 on the detailed technical requirements for carrying out the tests specified in Directive 2005/66/EC of the European Parliament and of the Council relating to the use of frontal protection systems on motor vehicles (notified under document number C(2006) 776) (Text with EEA relevance) (2006/368/EC)
Citation: EU Decision 2006/368, division 5.7
Official version: legislation.gov.uk

Data

JSON
Markdown

Home Search Browse Data MCP About Privacy

Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives. legislation.gov.uk is the official version.

Not legal advice.

👋 Jason Cartwright
Cookieless analytics by fivebar