# Commission Decision of 7 November 2006 concerning a technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system and modifying Annex A to Decision 2006/679/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system (notified under document number C(2006) 5211) (Text with EEA relevance) (2006/860/EC), Appendix ANNEX G: OPEN POINTS

Extent: E+W+S+N.I.

PRIORITY OF AN OPEN POINT
It shall be distinguished between 2 priorities
Priority 1 (P1): The most urgent part
Priority 2 (P2): The least urgent part
Interfaces
Section 4,3
Level crossing functionality (P1) (baseline 3.0.0). Interfaces with OPE TSI, braking safety margins (P1) Interfaces with TSI Rolling Stock Traction Units and coaches (P1) Interface between Rolling Stock vigilance device and GSM-R onboard assembly (P1)
Annex A
Index 1 FRS (for the subject of Level Crossings) (P1 linked to LX)
Index 16 Document approved with the remark of the pending CEPT approval
Index 28 Reliability — Availability Requirements (P1)
Index B32 Guideline for references (P1)
Index 38 Marker Boards (P1) Design agreed, document to be produced
Index 41 JRU Test Specification (P1) linked to Index 55
Index 44 Odometry FIS (P2)
Index 47 Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System (P1)
Index 48 Test specification for mobile equipment GSM-R (P1)
Index 50 Test specification for EUROLOOP (P1)
Index 51 Ergonomic aspects of the DMI (P1)
Index 53 ETCS values of variables controlled outside UNISIG — Manual — (P1)
Index 55 Juridical recorder baseline requirements (P1 for the overall)
Index 56 KM Conformance Requirements (P1)
Index 57 Requirements on pre-fitting of ERTMS on-board equipment (P1)
Index 58 Requirements for RBC-RBC Safe Communication Interface (P1)
Index 59 Requirements on pre-fitting of ERTMS track side equipment (P1)
Index 60 ETCS version management (P1)
Index 61 GSM-R version management (P1)
Index 62 RBC-RBC Test specification for Safe Communication Interface (P1)
Index 63 RBC-RBC Safe Communication Interface (P1)
GSM-R:
Interconnection and roaming between GSM-R networks (P1)
Border crossing (P1)
GPRS and ASCI (P2)
Annex A Appendix 1: (P1)
2.1.5 Relation between axle distance and wheel diameter
3.2.1 Metal free space around wheels
3.3.1 Metal mass of a vehicle
3.5.4 Additional requirements on locomotives and multiple units
4.1 Use of sanding equipment
4.2.1 Use of composite brake blocks
5.1.1 Electromagnetic interferences (Traction current)
5.3.1 Electromagnetic interferences (Electric, magnetic, electromagnetic fields)
Annex A appendix 2: (P1)
HABD
Annex B, part 4.
ETCS Class 1 CCM related open points
Specification of some of the ETCS variables (P1)
Additional interfaces
Functionality and interfaces of staff protection systems to the signalling system (P2)
Interface with service brake. This will have to be examined during the elaboration of the TSI for rolling stock.

---
Source: https://www.legislation.gov.uk/eudn/2006/860/annex/annex/G (the official version)
Page: https://openlegislation.uk/eu-decision-2006-860/annex/annex-G
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.