# Commission Decision of 7 November 2006 concerning a technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system and modifying Annex A to Decision 2006/679/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system (notified under document number C(2006) 5211) (Text with EEA relevance) (2006/860/EC), Division 4.2.10: HABD (Hot axle box detector)

Extent: E+W+S+N.I.

This Basic Parameter specifies the requirements for the track-side equipment, used to check if the temperature of passing rolling stock axle bearings has exceeded a certain value and to transmit this information to a control centre. The requirements are defined in Annex A, Appendix 2.
The treatment of rolling stock equipped with on-board detection is also described in TSI RS HS section 4.2.11.

---
Source: https://www.legislation.gov.uk/eudn/2006/860/annex/division/4/division/4.2/division/4.2.10 (the official version)
Page: https://openlegislation.uk/eu-decision-2006-860/annex/division-4/division-4.2/division-4.2.10
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.