# Commission Decision of 7 November 2006 concerning a technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system and modifying Annex A to Decision 2006/679/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system (notified under document number C(2006) 5211) (Text with EEA relevance) (2006/860/EC), Article 3

Extent: E+W+S+N.I.

1. With regard to the systems referred to in Annex B of the TSI and to those issues classified as ‘Open Points’ in Annex G of the TSI, the conditions to be complied with for the verification of interoperability within the meaning of Article 16(2) of Directive 96/48/EC shall be those applicable technical rules in use in the Member State which authorises the placing in service of the subsystems covered by this Decision.
2. Each Member State shall notify to the other Member States and to the Commission within six months of the notification of this Decision:
(a) the list of applicable technical rules mentioned in paragraph 1;
(b) the conformity assessment and checking procedures to be applied with regard to the application of the applicable technical rules referred to in paragraph 1;
(c) the bodies it appoints for carrying out those conformity-assessment and checking procedures.

---
Source: https://www.legislation.gov.uk/eudn/2006/860/article/3 (the official version)
Page: https://openlegislation.uk/eu-decision-2006-860/article-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

