Division Product configuration

The product must be configured as shipped and recommended for use, particularly for key parameters such as power-management default delay times, print quality, and resolution. In addition:

• Paper source and finishing hardware must be present and configured as shipped; however, use of these features in the test is at the manufacturer’s discretion (e.g. any paper source may be used). Any hardware that is part of the model and intended to be installed or attached by the user (e.g. a paper feature) must be installed prior to this test.

• Anti-humidity features may be turned off if they are user-controllable.

• For fax machines, a page should be fed into the unit’s document feeder for convenience copying, and may be placed in the document feeder before the test begins. The unit need not be connected to a telephone line unless the telephone line is necessary for performing the test. For example, if the fax machine lacks convenience copying capability, then the job performed in step 2 should be sent via phone line. On fax machines without a document feeder, the page should be placed on the platen.

• If a product has an auto-off mode enabled as shipped, it must be enabled prior to performing the test.