# Commission Decision of 14 January 2011 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards sealants for non-structural use in joints in buildings and pedestrian walkways (notified under document C(2011) 62) (Text with EEA relevance) (2011/19/EU), Division: Systems of attestation of conformity

Extent: E+W+S+N.I.

For the product(s) and intended use(s) listed below, CEN/Cenelec is requested to specify the following system(s) of attestation of conformity in the relevant harmonised European standards:
System 3: See point (ii) of Section 2 of Annex III to Directive 89/106/EEC, second possibility.
System 4: See point (ii) of Section 2 of Annex III to Directive 89/106/EEC, third possibility.
Product
Intended use
Level(s) or class(es)
AoC system
—
Sealants for external walls
Outdoor applications
—
3
—
Sealants for internal walls, partitions
Indoor applications
—
4
—
Sealants for glazing
For uses in building construction
—
3
—
Sealants for pedestrian walkways
—
3
—
Sealants for sanitary joints
—
3
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

---
Source: https://www.legislation.gov.uk/eudn/2011/19/annex/II/division/PRODUCT/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2011-19/annex-II/division-PRODUCT/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.