Division 4 REQUIREMENTS FOR SAFETY DEVICES INTENDED FOR RETROFITTING

Internal blinds or corded window coverings fitted with the relevant safety device(s), shall fulfil the requirements set out in section 2.

The safety device(s) shall be accompanied by the following warnings, information and instructions:

• the name or trademark of the manufacturer or importer and professional installer (if any),

• the instructions: ‘Read these instructions carefully before installing and using the device. Children can be strangled if the device is not installed correctly. Keep the instructions for future reference’‘Use of additional safety devices helps reduce the risk of strangulation but cannot be considered entirely foolproof’,

• the instructions: ‘Test the device if not used regularly’ and ‘Replace the device if it is faulty’,

• a warning that the release of small parts could result in the internal asphyxiation of the child,

• information on the type of internal blind or corded window covering for which the product is designed and tested,

• information on the use (purpose, and possible limitations of the safety device),

• precise instructions on correct installation and location of the device(s). If a special assembly tool is needed, it shall be provided by the supplier of the device(s),

• the instructions shall be accompanied by pictograms to facilitate understanding,

• any other information for safe use.