# Commission Implementing Decision of 28 February 2012 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the manufacture of glass (notified under document C(2012) 865) (Text with EEA relevance) (2012/134/EU), Division 69

Extent: E+W+S+N.I.

BAT is to reduce metal emissions from the melting furnace and/or downstream processes by using one or a combination of the following techniques:
A description of the technique is given in Section 1.10.5.
Technique
Applicability
(i)
Selection of raw materials for the batch formulation with a low content of metals
The techniques are generally applicable
(ii)
Applying a filtration system
Table 59
BAT-AELs for metal emissions from the melting furnace and/or downstream processes in the HTIW sector
The levels refer to the sum of metals present in the flue-gases in both solid and gaseous phases.
Parameter
BAT-AEL
mg/Nm3
Σ (As, Co, Ni, Cd, Se, CrVI)
< 1
Σ (As, Co, Ni, Cd, Se, CrVI, Sb, Pb, CrIII, Cu, Mn, V, Sn)
< 5

---
Source: https://www.legislation.gov.uk/eudn/2012/134/annex/division/5/division/1.8/division/1.8.5/division/69 (the official version)
Page: https://openlegislation.uk/eu-decision-2012-134/annex/division-5/division-1.8/division-1.8.5/division-69
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.