# Commission Implementing Decision of 28 February 2012 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for iron and steel production (notified under document C(2012) 903) (Text with EEA relevance) (2012/135/EU), Division 14

Extent: E+W+S+N.I.

BAT is to measure the stack emissions of pollutants from the main emission sources from all processes included in the Sections 1.2 – 1.7 whenever BAT-AELs are given and in process gas-fired power plants in iron and steel works.
BAT is to use continuous measurements at least for:
primary emissions of dust, nitrogen oxides (NOX) and sulphur dioxide (SO2) from sinter strands
nitrogen oxides (NOX) and sulphur dioxide (SO2) emissions from induration strands of pelletisation plants
dust emissions from blast furnace cast houses
secondary emissions of dust from basic oxygen furnaces
emissions of nitrogen oxides (NOX) from power plants
dust emissions from large electric arc furnaces.
For other emissions, BAT is to consider using continuous emission monitoring depending on the mass flow and emission characteristics.

---
Source: https://www.legislation.gov.uk/eudn/2012/135/annex/division/3/division/1.1/division/1.1.7/division/14 (the official version)
Page: https://openlegislation.uk/eu-decision-2012-135/annex/division-3/division-1.1/division-1.1.7/division-14
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.