{
  "url": "https://openlegislation.uk/eu-decision-2012-202/annex",
  "json_url": "https://openlegislation.uk/eu-decision-2012-202/annex.json",
  "legislation": "eudn/2012/202",
  "legislation_title": "Commission Implementing Decision of 29 March 2012 amending Decision 1999/94/EC on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards precast normal/lightweight/autoclaved aerated concrete products (notified under document C(2012) 1977) (Text with EEA relevance) (2012/202/EU)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2012-202",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "In Annex III to Decision 1999/94/EC, the following text is added:\n‘PRODUCT FAMILY\nBEAM/BLOCK FLOOR UNITS AND ELEMENTS INCORPORATING ORGANIC MATERIALS\nSystems of attestation of conformity\nFor the product(s) and intended use(s) listed below, the European Committee for Standardisation (CEN) is requested to specify the following system of attestation of conformity in the relevant harmonised European standards:\nProducts or materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (for example, the addition of fire retardants or the limitation of organic material).\nProducts or materials not covered by footnote\nProducts or materials that are not required to be tested for reaction to fire (for example, products or materials of Class A1 in accordance with Commission Decision 96/603/EC (OJ L 267, 19.10.1996, p. 23)).\nSystem 1: See Annex III(2)(i) to Directive 89/106/EEC, without audit-testing of samples.\nSystem 3: See Annex III(2)(ii) to Directive 89/106/EEC, second possibility.\nSystem 4: See Annex III(2)(ii) to Directive 89/106/EEC, third possibility.\nProduct(s)\nIntended use(s)\nLevel(s) or class(es)(Reaction to fire)\nAttestation of conformity system(s)\nBeam/block floor units and elements incorporating organic materials\nFor uses subject to regulations on reaction to fire\n(A1, A2, B, C)\n1\n(A1, A2, B, C), D, E\n3\n(A1 to E), F\n4\nThe specification for the system must be such that it may be implemented even where it is not necessary to determine the performance for a certain characteristic, because at least one Member State has no legal requirement for that characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the Interpretative Documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if it does not wish to declare the performance of the product in that respect.’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Products or materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (for example, the addition of fire retardants or the limitation of organic material)."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Products or materials not covered by footnote"
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Products or materials that are not required to be tested for reaction to fire (for example, products or materials of Class A1 in accordance with Commission Decision 96/603/EC (OJ L 267, 19.10.1996, p. 23))."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2012/202/annex",
    "retrieved_at": "2026-11-01T15:15:29.379783+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}