{
  "url": "https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.2/division-1.2.6/division-1.2.6.1/division-19/division-1",
  "json_url": "https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.2/division-1.2.6/division-1.2.6.1/division-19/division-1.json",
  "legislation": "eudn/2013/163",
  "legislation_title": "Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2013-163",
  "path": "annex/division/5/division/1.2/division/1.2.6/division/1.2.6.1/division/19/division/1",
  "kind": "division",
  "number": null,
  "heading": "BAT-associated emission levels",
  "text": "See Table 2.\nTable 2\nBAT-associated emission levels for NOx from the flue-gases of kiln firing and/or preheating/precalcining processes in the cement industry\nThe upper level of the BAT-AEL range is 500 mg/Nm3, if the initial NOx level after primary techniques is > 1 000 mg/Nm3.\nExisting kiln system design, fuel mix properties including waste and raw material burnability (e.g. special cement or white cement clinker) can influence the ability to be within the range. Levels below 350 mg/Nm3 are achieved at kilns with favourable conditions when using SNCR. In 2008, the lower value of 200 mg/Nm3 has been reported as a monthly average for three plants (easy burning mix used) using SNCR.\nDepending on initial levels and NH3 slip.\nKiln type\nUnit\nBAT-AEL(daily average value)\nPreheater kilns\nmg/Nm3\n< 200 – 450\nLepol and long rotary kilns\nmg/Nm3\n400 – 800",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "The upper level of the BAT-AEL range is 500 mg/Nm3, if the initial NOx level after primary techniques is > 1 000 mg/Nm3."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Existing kiln system design, fuel mix properties including waste and raw material burnability (e.g. special cement or white cement clinker) can influence the ability to be within the range. Levels below 350 mg/Nm3 are achieved at kilns with favourable conditions when using SNCR. In 2008, the lower value of 200 mg/Nm3 has been reported as a monthly average for three plants (easy burning mix used) using SNCR."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Depending on initial levels and NH3 slip."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.2/division/1.2.6/division/1.2.6.1/division/19/division/1",
    "retrieved_at": "2026-11-01T15:15:07.930990+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}