# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division: BAT-associated emission levels

Extent: E+W+S+N.I.

See Table 5.
Table 5
BAT-associated emission levels for metals from the flue-gases of kiln firing processes
Low levels have been reported based on the quality of the raw materials and the fuels.
Low levels have been reported based on the quality of the raw materials and the fuels. Values higher than 0,03 mg/Nm3 have to be further investigated. Values close to 0,05 mg/Nm3 require consideration of additional techniques (e.g. lowering of the flue-gas temperature, activated carbon).
Metals
Unit
BAT-AEL(average over the sampling period (spot measurements, for at least half an hour))
Hg
mg/Nm3
< 0,05
Σ (Cd, Tl)
mg/Nm3
< 0,05
Σ (As, Sb, Pb, Cr, Co, Cu, Mn, Ni, V)
mg/Nm3
< 0,5

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.2/division/1.2.8/division/28/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.2/division-1.2.8/division-28/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.