{
  "url": "https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.3/division-1.3.7/division-1.3.7.2/division-45/division-1",
  "json_url": "https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.3/division-1.3.7/division-1.3.7.2/division-45/division-1.json",
  "legislation": "eudn/2013/163",
  "legislation_title": "Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2013-163",
  "path": "annex/division/5/division/1.3/division/1.3.7/division/1.3.7.2/division/45/division/1",
  "kind": "division",
  "number": null,
  "heading": "BAT-associated emission levels",
  "text": "See Table 9.\nTable 9\nBAT-associated emission levels for NOx from flue-gases of kiln firing processes in the lime industry\nThe higher ends of the ranges are related to the production of dolime and hard burned lime. Higher levels than the upper end of the range may be associated with the production of sintered dolime.\nFor LRK and PRK with shaft producing hard burned lime, the upper level is up to 800 mg/Nm3\nWhere primary techniques as indicated in BAT 45 (a)I are not sufficient to reach this level and where secondary techniques are not applicable to reduce the NOx emissions to 350 mg/Nm3, the upper level is 500 mg/Nm3, especially for hard burned lime and for the use of biomass as fuel.\nKiln type\nUnit\nBAT-AEL(daily average value or average over the sampling period (spot measurements for at least half an hour), stated as NO2)\nPFRK, ASK, MFSK, OSK\nmg/Nm3\n100 – 350\nLRK, PRK\nmg/Nm3\n< 200 – 500",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "The higher ends of the ranges are related to the production of dolime and hard burned lime. Higher levels than the upper end of the range may be associated with the production of sintered dolime."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Where primary techniques as indicated in BAT 45 (a)I are not sufficient to reach this level and where secondary techniques are not applicable to reduce the NOx emissions to 350 mg/Nm3, the upper level is 500 mg/Nm3, especially for hard burned lime and for the use of biomass as fuel."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "For LRK and PRK with shaft producing hard burned lime, the upper level is up to 800 mg/Nm3"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.3/division/1.3.7/division/1.3.7.2/division/45/division/1",
    "retrieved_at": "2026-11-01T15:15:07.930990+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}