# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division 47

Extent: E+W+S+N.I.

In order to reduce the emissions of SOx from the flue-gases of kiln firing processes, BAT is to use one or a combination of the following techniques:
A description of the techniques is provided in Section 1.6.3
Technique
Applicability
a
Process optimisation to ensure an efficient absorption of sulphur dioxide (e.g. efficient contact between the kiln gases and the quicklime)
Process control optimisation is applicable to all lime plants
b
Selecting fuels with a low sulphur content
Generally applicable, subject to fuel availability in particular for use in long rotary kilns (LRK), due to high SOx emissions
c
Using absorbent addition techniques (e.g. absorbent addition, dry flue-gas cleaning with a filter, wet scrubber, or activated carbon injection)
Absorbent addition techniques are, in principle, applicable in the lime industry; however, this technique had not yet been applied in the lime sector in 2007. Particularly for rotary lime kilns further investigation is required in order to assess its applicability

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.3/division/1.3.7/division/1.3.7.3/division/47 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.3/division-1.3.7/division-1.3.7.3/division-47
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

