# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division: BAT-associated emission levels

Extent: E+W+S+N.I.

See Table 10.
Table 10
BAT-associated emission levels for SOx from flue-gases of kiln firing processes in the lime industry
The level depends on the initial SOx level in the flue-gas and on the reduction technique used.
For the production of sintered dolime using the ‘double- pass process’, SOx emissions might be higher than the upper end of the range.
Kiln type
Unit
BAT-AEL (daily average value or average over the sampling period (spot measurements for at least half an hour), SOx expressed as SO2)
PFRK, ASK, MFSK, OSK, PRK
mg/Nm3
< 50 – 200
LRK
mg/Nm3
< 50 – 400

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.3/division/1.3.7/division/1.3.7.3/division/47/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.3/division-1.3.7/division-1.3.7.3/division-47/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

