# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division 61

Extent: E+W+S+N.I.

In order to reduce the emissions of gaseous compounds (i.e. NOx, HCl, SOx, CO) from flue-gases of kiln firing processes, BAT is to use one or a combination of the following primary techniques:
Technique
Applicability
a
Careful selection and control of the substances entering the kiln in order to reduce the pollutant precursors, i.e.:
I.. selecting fuels with low contents of sulphur, if available, chlorine and nitrogen
II.. selecting raw materials with low contents of organic matter
III.. selecting suitable waste fuels for the process and the burner
Generally applicable subject to availability of raw materials and fuels, the type of kiln used, the desired product qualities and the technical possibility of injecting the fuels into the selected kiln.
Waste materials can be considered as fuels in the magnesia industry but had not yet been applied in the magnesia industry in 2007
b
Using process optimisation measures/techniques to ensure a smooth and stable kiln process, operating close to the stoichiometric required air
Process control optimisation is applicable to all kiln types used in the magnesia industry. However, a highly sophisticated process control system may be necessary

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.4/division/1.4.4/division/1.4.4.1/division/61 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.4/division-1.4.4/division-1.4.4.1/division-61
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

