# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division 65

Extent: E+W+S+N.I.

In order to reduce the emissions of SOx from the flue-gases of kiln firing processes, BAT is to use a combination of the following primary and secondary techniques:
A description of the measure/technique is provided in Section 1.7.2
Technique
Applicability
a
Process optimisation techniques
Generally applicable
b
Selecting fuels with a low sulphur content
Generally applicable subject to availability of low sulphur fuels which may be impacted by the energy policy of the Member State. The selection of fuel also depends on the quality of the final product, technical possibilities and economic considerations
c
A dry absorbent addition technique (sorbent addition into the flue gas stream such as reactive MgO grades, hydrated lime, activated carbon, etc.), in combination with a filter
Generally applicable
d
Wet scrubber
The applicability may be limited in arid areas by the large volume of water necessary and the need for waste water treatment and the related cross-media effects

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.4/division/1.4.4/division/1.4.4.4/division/65 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.4/division-1.4.4/division-1.4.4.4/division-65
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

