# Commission Implementing Decision of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (notified under document C(2013) 1728) (Text with EEA relevance) (2013/163/EU), Division: BAT-associated emission levels

Extent: E+W+S+N.I.

See Table 15.
Table 15
BAT-associated emission levels for SOx from flue-gases of kiln firing processes in the magnesia industry
The BAT-AELs depend on the content of sulphur in the raw materials and fuels. The lower end of the range is associated with the use of raw materials with low sulphur content and the use of natural gas; the upper end of the range is associated with the use of raw materials with higher sulphur content and/or the use of sulphur-containing fuels.
Cross-media effects should be taken into account to assess the best combination of BAT to reduce SOx emissions.
When a wet scrubber is not applicable, BAT-AELs depend on the sulphur content of raw materials and fuels. In this case, the BAT-AEL is < 1 500 mg/Nm3 while ensuring a SOX emissions removal efficiency of at least 60 %.
Parameter
Unit
BAT-AEL (daily average value or average over the sampling period (spot measurements for at least half an hour))
SOX expressed as SO2
mg/Nm3
< 50 – 400

---
Source: https://www.legislation.gov.uk/eudn/2013/163/annex/division/5/division/1.4/division/1.4.4/division/1.4.4.4/division/65/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-2013-163/annex/division-5/division-1.4/division-1.4.4/division-1.4.4.4/division-65/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

