# Commission Implementing Decision of 10 March 2014 on the approval of the light emitting diodes low beam module ‘E-Light’ as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance) (2014/128/EU), Division 2: Testing conditions

Extent: E+W+S+N.I.

The requirements of UN/ECE Regulation No 112 on Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps and/or light-emitting diode (LED) modules shall apply. For determining the power consumption, the reference is to be made to point 6.1.4 of Regulation No 112, and points 3.2.1 and 3.2.2 of Annex 10 to Regulation No 112.
In addition, a warming-up of the equipment under test (EUT) during 30 minutes shall take place by delivering a current of 0,78 A to the EUT, with a voltage of 13,4 V. The EUT consists of the electronic control unit (ECU) of the LED lamp and the low beam module.

---
Source: https://www.legislation.gov.uk/eudn/2014/128/annex/division/2 (the official version)
Page: https://openlegislation.uk/eu-decision-2014-128/annex/division-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.