# Commission Implementing Decision of 10 March 2014 on the approval of the light emitting diodes low beam module ‘E-Light’ as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance) (2014/128/EU), Division 4.1: Calculate the power savings

Extent: E+W+S+N.I.

For each of the 10 measurements the power which is used is to be calculated by multiplying the installed voltage with the measured current. This is to result in 10 values. Each value is to be expressed in four decimals. Then the mean value of the used power is to be calculated, which is the sum of the 10 values for the power divided by 10.
The resulting power savings are to be calculated with the following formula:
Formula (1) ΔP = P baseline: − P eco-innovation
Where:
ΔP Power savings in W;
Pbaseline Power of the baseline, which is 137 W;
Peco-innovation Mean value of the used power of the eco-innovation in W.

---
Source: https://www.legislation.gov.uk/eudn/2014/128/annex/division/4/division/4.1 (the official version)
Page: https://openlegislation.uk/eu-decision-2014-128/annex/division-4/division-4.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.