# Commission Implementing Decision of 26 September 2014 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the production of pulp, paper and board (notified under document C(2014) 6750) (Text with EEA relevance) (2014/687/EU), Division BAT 8: BAT is to monitor the key process parameters according to the table given below.

Extent: E+W+S+N.I.

I. Monitoring key process parameters relevant for emissions to air
Parameter
Monitoring frequency
Pressure, temperature, oxygen, CO and water vapour content in flue-gas for combustion processes
Continuous
II. Monitoring key process parameters relevant for emissions to water
Parameter
Monitoring frequency
Water flow, temperature and pH
Continuous
P and N content in biomass, sludge volume index, excess ammonia and ortho-phosphate in the effluent, and microscopy checks of the biomass
Periodic
Volume flow and CH4 content of biogas produced in anaerobic waste water treatment
Continuous
H2S and CO2 contents of biogas produced in anaerobic waste water treatment
Periodic

---
Source: https://www.legislation.gov.uk/eudn/2014/687/annex/division/9/division/1.1/division/1.1.6/division/bat+8 (the official version)
Page: https://openlegislation.uk/eu-decision-2014-687/annex/division-9/division-1.1/division-1.1.6/division-bat+8
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.