# Commission Implementing Decision of 9 October 2014 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for the refining of mineral oil and gas (notified under document C(2014) 7155) (Text with EEA relevance) (2014/738/EU), Division

Extent: E+W+S+N.I.

BAT-associated emission levels: See Table 12.
Table 12
BAT-associated emission levels for dust emissions to air from a multi-fuel fired combustion unit with the exception of gas turbines
The lower end of the range is achievable for units with the use of end-of-pipe techniques.
The upper end of the range refers to the use of a high percentage of oil burning and where only primary techniques are applicable.
Parameter
Type of combustion
BAT-AEL(monthly average)mg/Nm3
Dust
Multi-fuel firing
5-50
for existing unit
5-25
for new unit < 50 MW
The associated monitoring is in BAT 4.

---
Source: https://www.legislation.gov.uk/eudn/2014/738/annex/division/3/division/1.9/division/2 (the official version)
Page: https://openlegislation.uk/eu-decision-2014-738/annex/division-3/division-1.9/division-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.