{
  "url": "https://openlegislation.uk/eu-decision-2016-1032/annex/division-1.2/division-1.2.3/division-1.2.3.3/division-bat+46",
  "json_url": "https://openlegislation.uk/eu-decision-2016-1032/annex/division-1.2/division-1.2.3/division-1.2.3.3/division-bat+46.json",
  "legislation": "eudn/2016/1032",
  "legislation_title": "Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2016-1032",
  "path": "annex/division/1.2/division/1.2.3/division/1.2.3.3/division/bat+46",
  "kind": "division",
  "number": "BAT 46",
  "heading": null,
  "text": "In order to reduce organic compound emissions to air from the pyrolytic treatment of copper turnings, and the drying, smelting and melting of secondary raw materials, BAT is to use one of the techniques given below.\nDescriptions of the techniques are given in Section 1.10.\nTechnique\nApplicability\na\nAfterburner or post-combustion chamber or regenerative thermal oxidiser\nThe applicability is restricted by the energy content of the off-gases that need to be treated, as off-gases with a lower energy content require a higher fuel use\nb\nInjection of adsorbent in combination with a bag filter\nGenerally applicable\nc\nDesign of furnace and the abatement techniques according to the raw materials available\nOnly applicable to new furnaces or major upgrades of existing furnaces\nd\nSelect and feed the raw materials according to the furnace and the abatement techniques used\nGenerally applicable\ne\nThermal destruction of TVOC at high temperatures in the furnace (> 1 000 °C)\nGenerally applicable\nBAT-associated emission levels: See Table 4.\nTable 4\nBAT-associated emission levels for emissions to air of TVOC from the pyrolytic treatment of copper turnings, and the drying, smelting and melting of secondary raw materials\nAs a daily average or as an average over the sampling period.\nThe lower end of the range is associated with the use of a regenerative thermal oxidiser.\nParameter\nBAT-AEL (mg/Nm3)\nTVOC\n3-30",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Descriptions of the techniques are given in Section 1.10."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "As a daily average or as an average over the sampling period."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "The lower end of the range is associated with the use of a regenerative thermal oxidiser."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2016/1032/annex/division/1.2/division/1.2.3/division/1.2.3.3/division/bat+46",
    "retrieved_at": "2026-11-01T15:13:55.916563+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}