# Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance), Division 1.3.3.1.1: Channelled dust and fluoride emissions

Extent: E+W+S+N.I.

The associated monitoring is in BAT 10.
Descriptions of the techniques are given in Section 1.10
Technique
Applicability
a
Dry scrubber using alumina as the adsorbent agent followed by a bag filter
Generally applicable
b
Dry scrubber using alumina as the adsorbent agent followed by a bag filter and a wet scrubber
Applicability may be limited in the following cases:
very high off-gas flow rates (due to the significant amounts of waste and waste water generated)
in arid areas (due to the large volume of water necessary and the need for waste water treatment)
BAT-associated emission levels: See Table 11 and Table 12.
Table 11
BAT-associated emission levels for dust and fluoride emissions to air from electrolytic cells
As a daily average or as an average over the sampling period.
As an average over the sampling period.
Parameter
BAT-AEL (mg/Nm3)
Dust
2-5
HF
≤ 1,0
Total fluorides
≤ 1,5

---
Source: https://www.legislation.gov.uk/eudn/2016/1032/annex/division/1.3/division/1.3.3/division/1.3.3.1/division/1.3.3.1.1 (the official version)
Page: https://openlegislation.uk/eu-decision-2016-1032/annex/division-1.3/division-1.3.3/division-1.3.3.1/division-1.3.3.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.