Division Description
United Kingdom
BAT 100(a): An alkali salt solution is used to remove sulphates from secondary materials prior to smelting.
BAT 100(d): The fixation of sulphur in the smelt phase is achieved by adding iron and soda (Na2CO3) in the smelters which react with the sulphur contained in the raw materials to form Na2S-FeS slag.
BAT-associated emission levels: See Table 28.
Table 28
BAT-associated emission levels for SO2 emissions to air (other than those that are routed to the sulphuric acid or liquid SO2 plant) from charging, smelting and tapping in primary and secondary lead and/or tin production
| As a daily average or as an average over the sampling period. | |
| When wet scrubbers are not applicable, the upper end of the range is 500 mg/Nm3. | |
| Parameter | BAT-AEL (mg/Nm3)f1 f2 |
|---|---|
| SO2 | 50-350 |
Annotations
Footnotes
- f1
-
As a daily average or as an average over the sampling period.
- f2
-
When wet scrubbers are not applicable, the upper end of the range is 500 mg/Nm3.
Notes on Division BAT 100
Footnotes
- f1
-
Descriptions of the techniques are given in Section 1.10.