# Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance), Division BAT 114

Extent: E+W+S+N.I.

In order to reduce zinc and sulphuric acid emissions to air from leaching, purification and electrolysis, and to reduce arsane and stibane emissions from purification, BAT is to use one or a combination of the techniques given below.
Descriptions of the techniques are given in Section 1.10.
Technique
a
Wet scrubber
b
Demister
c
Centrifugal system
BAT-associated emission levels: See Table 30.
Table 30
BAT-associated emission levels for zinc and sulphuric acid emissions to air from leaching, purification and electrolysis and for arsane and stibane emissions from purification
As an average over the sampling period.
Parameter
BAT-AEL (mg/Nm3)
Zn
≤ 1
H2SO4
< 10
Sum of AsH3 and SbH3
≤ 0,5

---
Source: https://www.legislation.gov.uk/eudn/2016/1032/annex/division/1.5/division/1.5.1/division/1.5.1.1/division/1.5.1.1.2/division/1.5.1.1.2.2/division/bat+114 (the official version)
Page: https://openlegislation.uk/eu-decision-2016-1032/annex/division-1.5/division-1.5.1/division-1.5.1.1/division-1.5.1.1.2/division-1.5.1.1.2.2/division-bat+114
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

