# Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance), Division BAT 132

Extent: E+W+S+N.I.

In order to reduce dust and metal emissions to air from pyrometallurgical cadmium production and the melting, alloying and casting of cadmium ingots, BAT is to use one or a combination of the techniques given below.
Descriptions of the techniques are given in Section 1.10.
Technique
Applicability
a
Bag filter
Generally applicable
b
ESP
Generally applicable
c
Wet scrubber
Applicability may be limited in the following cases:
very high off-gas flow rates (due to the significant amounts of waste and waste water generated)
in arid areas (due to the large volume of water necessary and the need for waste water treatment)
BAT-associated emission levels: See Table 38.
Table 38
BAT-associated emission levels for dust and cadmium emissions to air from pyrometallurgical cadmium production and the melting, alloying and casting of cadmium ingots
As an average over the sampling period.
Parameter
BAT-AEL (mg/Nm3)
Dust
2-3
Cd
≤ 0,1

---
Source: https://www.legislation.gov.uk/eudn/2016/1032/annex/division/1.5/division/1.5.4/division/1.5.4.1/division/1.5.4.1.2/division/bat+132 (the official version)
Page: https://openlegislation.uk/eu-decision-2016-1032/annex/division-1.5/division-1.5.4/division-1.5.4.1/division-1.5.4.1.2/division-bat+132
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

