{
  "url": "https://openlegislation.uk/eu-decision-2016-160/annex/division-3",
  "json_url": "https://openlegislation.uk/eu-decision-2016-160/annex/division-3.json",
  "legislation": "eudn/2016/160",
  "legislation_title": "Commission Implementing Decision (EU) 2016/160 of 5 February 2016 on the approval of the Toyota Motor Europe efficient exterior lighting using light emitting diodes as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2016-160",
  "path": "annex/division/3",
  "kind": "division",
  "number": "3",
  "heading": "The testing procedure",
  "text": "Measurements are to be performed as shown in the figure. The following equipment is to be used:\na power supply unit (i.e. variable voltage supplier),\ntwo digital multi-meters, one for measuring the DC current, and the other for measuring the DC voltage. In the figure the test set-up shows the possible case of the DC voltage meter integrated in the power supply unit.\nIn total, five measurements on the current should be done at 13,2 V for each type of lighting used in the vehicle (i.e. low-beam headlamp, high-beam headlamp, front position, front fog, rear fog, front turn signal, rear turn signal, licence plate and reversing lamps). LED module(s) operated by an electronic light source control gear, shall be measured as specified by the applicant.\nAs an alternative, other measurements on the current can be done at other additional voltages. The manufacturer must hand over verified documentation on the necessity to perform these other measurements to the type-approval authority. In total, five measurements on the current are to be done at each of these additional voltages.\nThe exact installed voltages and the measured current are to be recorded in four decimals.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2016/160/annex/division/3",
    "retrieved_at": "2026-11-01T15:14:04.982672+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}