Division 5.1 Guidance for power measurements

Testing at Factory Default Settings: Power measurements shall be performed with the product in its as-shipped condition for the duration of Sleep Mode and On Mode testing, with all user-configurable options set to factory defaults, except as otherwise specified by this test method.

1. (1)

   Picture level adjustments shall be performed as per the instructions in this test method.

2. (2)

   Products that include a ‘forced menu’ that requires picture setting selection upon initial start-up shall be tested in the ‘standard’ or ‘home’ picture setting. In the case that no standard setting or equivalent exists, the default setting recommended by the manufacturer shall be used for testing and recorded in the test report. Products that do not include a forced menu shall be tested in the default picture setting.

Point of Deployment (POD) Modules: Optional POD modules shall not be installed.

Plug-in Modules: Optional Plug-in Modules shall be removed from the Display if the Display can be tested according to the test method without the module installed.

Sleep Mode with Multiple Functionalities: If the product offers multiple options for device behaviour in Sleep Mode (e.g. quick start) or multiple methods by which Sleep Mode may be entered, the power during all Sleep Modes shall be measured and recorded. All Sleep Mode testing shall be carried out as per Section 6.5.