OpenLegislation

Division 6.5 Sleep Mode testing

United Kingdom

Original text. Later amendments are not shown.

  1. (A)

    Sleep Mode power (PSLEEP) shall be measured according to IEC 62301:2011, with the additional guidance in Section 5.

  2. (B)

    The Sleep Mode test shall be conducted with the UUT connected to the Host Machine in the same manner as in the On Mode test. If possible, Sleep Mode shall be enacted by putting the Host Machine to sleep. For a computer Host Machine, Sleep Mode is defined in the Version 6.1 Energy Star Computers specification.

  3. (C)

    If the product has a variety of Sleep Modes that may be manually selected, or if the product can enter Sleep Mode via different methods (e.g. remote control or putting the Host Machine to sleep), measurements shall be performed and recorded in all Sleep Modes.

    If the product automatically transitions through its various Sleep Modes, the measurement time shall be long enough to obtain an average of all Sleep Modes. The measurement shall still meet requirements (e.g. stability, measurement period, etc.) outlined in Section 5.3 of IEC 62301:2011.