OpenLegislation

Division 2 Monitoring

United Kingdom

Original text. Later amendments are not shown.

Monitoring frequencies may be adapted if the data series clearly demonstrate a sufficient stability.

The sampling point is located where the emission leaves the installation.

TOC monitoring and COD monitoring are alternatives. TOC monitoring is the preferred option because it does not rely on the use of very toxic compounds.

TN and Ninorg monitoring are alternatives.

An appropriate combination of these methods can be used.

Substance/parameterStandard(s)Minimum monitoring frequencyf1 f2
Total organic carbon (TOC)f3 EN 1484Daily
Chemical oxygen demand (COD) No EN standard available
Total suspended solids (TSS)EN 872
Total nitrogen (TN)f4 EN 12260
Total inorganic nitrogen (Ninorg) Various EN standards available
Total phosphorus (TP)Various EN standards available
Adsorbable organically bound halogens (AOX)EN ISO 9562Monthly
MetalsCrVarious EN standards available
Cu
Ni
Pb
Zn
Other metals, if relevant
Toxicityf5 Fish eggs (Danio rerio)EN ISO 15088To be decided based on a risk assessment, after an initial characterisation
Daphnia (Daphnia magna Straus)EN ISO 6341
Luminescent bacteria (Vibrio fischeri)EN ISO 11348-1, EN ISO 11348-2 or EN ISO 11348-3
Duckweed (Lemna minor)EN ISO 20079
AlgaeEN ISO 8692, EN ISO 10253 or EN ISO 10710

Where large amounts of VOCs are handled, the screening and quantification of emissions from the installation by periodic campaigns with optical absorption-based techniques, such as Differential absorption light detection and ranging (DIAL) or Solar occultation flux (SOF), is a useful complementary technique to the techniques I to III.

  1. BAT 3Division BAT 3
  2. BAT 4Division BAT 4
  3. BAT 5BAT is to periodically monitor diffuse VOC emissions to air from relevant sources by using an appropriate combination of the techniques I-III or, where large amounts of VOC are handled, all of the techniques I-III.
  4. Description
  5. Description
  6. Applicability

Annotations

Footnotes

f1

Monitoring frequencies may be adapted if the data series clearly demonstrate a sufficient stability.

f2

The sampling point is located where the emission leaves the installation.

f3

TOC monitoring and COD monitoring are alternatives. TOC monitoring is the preferred option because it does not rely on the use of very toxic compounds.

f4

TN and Ninorg monitoring are alternatives.

f5

An appropriate combination of these methods can be used.