Division

The provisions of Article 7 of the Protocol concerning products having acquired originating status which are used in the manufacture of other products apply regardless of whether this status has been acquired inside the factory where these products are used or in another factory in the Community or in the ESA States.

Example:

An engine of heading No 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 per cent of the ex-works price, is made from ‘other alloy steel roughly shaped by forging’ of heading No ex 7224.

If this forging has been forged in the Community from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading No ex 7224 in the list. The forging can then count as originating in the value calculation for the engine regardless of whether it was produced in the same factory or in another factory in the Community. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used.

The rule in the list represents the minimum amount of working or processing required and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer originating status. Therefore, if a rule provides that non-originating material at a certain level of manufacture may be used, the use of such material at an earlier stage of manufacture is allowed and the use of such material at a later stage is not.

Without prejudice to Note 3.2 where a rule states that ‘materials of any heading’ may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression ‘manufacture from materials of any heading, including other materials of heading No …’ means that only materials classified in the same heading as the product of a different description than that of the product as given in column 2 of the list may be used.

When a rule in the list specifies that a product may be manufactured from more than one material, this means that any one or more materials may be used. It does not require that all be used.

Example:

The rule for fabrics of heading Nos 5208 to 5212 provides that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both.

Where a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule. (See also Note 6.3 below in relation to textiles).

Example:

The rule for prepared foods of heading No 1904 which specifically excludes the use of cereals and their derivatives does not prevent the use of mineral salts, chemicals and other additives which are not products from cereals.

However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture.

Example:

In the case of an article of apparel of ex Chapter 62 made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth – even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn – that is the fibre stage.

Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then these percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the highest of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials they apply to.