# Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council, Annex II

Extent: E+W+S+N.I.

No
Reference of the standard
Date of withdrawal
1.
EN 13445-2:2014
Unfired pressure vessels — Part 2: Materials
EN 13445-2:2014/A1:2016
EN 13445-2:2014/A2:2018
30 September 2019
2.
EN 13445-3:2014
Unfired pressure vessels — Part 3: Design
EN 13445-3:2014/A1:2015
EN 13445-3:2014/A2:2016
EN 13445-3:2014/A3:2017
EN 13445-3:2014/A4:2018
30 September 2019
3.
EN 13445-5:2014
Unfired pressure vessels — Part 5: Inspection and testing
30 September 2019
4.
EN 13445-6:2014
Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
30 September 2019
5.
EN 13480-2:2017
Metallic industrial piping — Part 2: Materials
30 September 2019
6.
EN 13480-5:2017
Metallic industrial piping — Part 5: Inspection and testing
30 September 2019
7.
EN 1252-2:2001
Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C
30 March 2020
8.
EN 1562:2012
Founding — Malleable cast irons
30 March 2020
9.
EN 1563:2011
Founding — Spheroidal graphite cast irons
30 March 2020
10.
EN 12516-1:2014
Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells
30 March 2020
11.
EN 12516-4:2014
Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
30 March 2020
12.
EN 13136:2013
Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation
30 March 2020
13.
EN 10217-1:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10217-1:2002/A1:2005
20 April 2021
14.
EN 10217-2:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-2:2002/A1:2005
20 April 2021
15.
EN 10217-3:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes
EN 10217-3:2002/A1:2005
20 April 2021
16.
EN 10217-4:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-4:2002/A1:2005
20 April 2021
17.
EN 10217-5:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005
20 April 2021
18.
EN 10217-6:2002
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-6:2002/A1:2005
20 April 2021
19.
EN 13480-1:2017
Metallic industrial piping – Part 1: General
20 April 2020
20.
EN 13480-6:2017
Metallic industrial piping – Part 6: Additional requirements for buried piping
20 April 2020
21.
EN ISO 4126-1:2013
Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)
20 April 2020

---
Source: https://www.legislation.gov.uk/eudn/2019/1616/annex/II (the official version)
Page: https://openlegislation.uk/eu-decision-2019-1616/annex-II
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.