{
  "url": "https://openlegislation.uk/eu-decision-2019-1766/introduction",
  "json_url": "https://openlegislation.uk/eu-decision-2019-1766/introduction.json",
  "legislation": "eudn/2019/1766",
  "legislation_title": "Commission Implementing Decision (EU) 2019/1766 of 23 October 2019 amending Implementing Decision (EU) 2019/436 as regards harmonised standard EN ISO 19085-3:2017 for numerically controlled boring and routing machines",
  "legislation_url": "https://openlegislation.uk/eu-decision-2019-1766",
  "path": "introduction",
  "kind": "introduction",
  "number": null,
  "heading": "Introductory text",
  "text": "Commission Implementing Decision (EU) 2019/1766\nof 23 October 2019\namending Implementing Decision (EU) 2019/436 as regards harmonised standard EN ISO 19085-3:2017 for numerically controlled boring and routing machines\nTHE EUROPEAN COMMISSION,\nHaving regard to the Treaty on the Functioning of the European Union,\nHaving regard to Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC, and in particular Article 10 thereof,\nWhereas:\n(1)\nIn accordance with Article 7 of Directive 2006/42/EC, machinery manufactured in conformity with a harmonised standard, the references to which have been published in the Official Journal of the European Union, is to be presumed to comply with the essential health and safety requirements covered by such a harmonised standard.\n(2)\nBy letter M/396 of 19 December 2006 the Commission made a request to CEN and CENELEC for the drafting, the revision and the completion of the work on harmonised standards in support of Directive 2006/42/EC to take account of changes introduced by that Directive in comparison with Directive 98/37/EC of the European Parliament and of the Council.\n(3)\nOn the basis of the request M/396 of 19 December 2006, CEN drafted the new harmonised standard EN ISO 19085-3:2017.\n(4)\nThe Commission together with the CEN has assessed whether the EN ISO 19085-3:2017 drafted by the CEN comply with the request M/396 of 19 December 2006.\n(5)\nIn December 2017, Germany raised a formal objection in accordance with Article 10 of Directive 2006/42/EC in respect of standard EN ISO 19085-3:2017 ’Woodworking machines – Safety requirements – Part 3: Numerically controlled (NC) boring and routing machines’.\n(6)\nThe formal objection raised by Germany is based on the failure of point 6.6.2.2.3.1 of standard EN ISO 19085-3:2017, dealing with the prevention of access to tools and other moving parts of the machine, to comply with the essential health and safety requirements set out in point 1.4.1 of Annex I to Directive 2006/42/EC.\n(7)\nHaving examined the standard EN ISO 19085-3:2017 together with the representatives of the committee established by Article 22 of Directive 2006/42/EC and the representatives of the committee established by Article 22 of the Regulation (EU) No 1025/2012 of the European Parliament and of the Council, the Commission concluded that the standard fails to meet one of the essential health and safety requirements set out in point 1.4.1. of Annex I to Directive 2006/42/EC, namely the requirement stating that guards and protective devices must not be easy to by-pass. In particular, the standard includes technical specifications for the access to the moving parts of the machine through the area between the machine frame and the lateral machine fences, but it does not address the design or protection of the machine frame itself, which in some cases may be low enough to be by-passed. Standard EN ISO 19085-3:2017 should therefore be published in the Official Journal of the European Union with restriction.\n(8)\nReferences of harmonised standards drafted in support of Directive 2006/42/EC are published in Commission Implementing Decision (EU) 2019/436. In order to ensure that all references of harmonised standards drafted in support of Directive 2006/42/EC are listed in the same act, the reference of standard EN ISO 19085-3:2017 should be included in an Annex to that Decision. Implementing Decision (EU) 2019/436 should therefore be amended accordingly.\n(9)\nCompliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,\nHAS ADOPTED THIS DECISION:",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "OJ L 157, 9.6.2006, p. 24."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Directive 98/37/EC of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery (OJ L 207, 23.7.1998, p. 1)"
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (OJ L 316, 14.11.2012, p. 12)."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 75, 19.3.2019, p. 108)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2019/1766/introduction",
    "retrieved_at": "2026-11-01T15:12:32.773661+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}