{
  "url": "https://openlegislation.uk/eu-decision-2019-41/annex",
  "json_url": "https://openlegislation.uk/eu-decision-2019-41/annex.json",
  "legislation": "eudn/2019/41",
  "legislation_title": "Council Decision (EU) 2019/41 of 3 December 2018 on the position to be taken, on behalf of the European Union, within the Association Committee established by the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, as regards an amendment to Protocol 3 to that Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation",
  "legislation_url": "https://openlegislation.uk/eu-decision-2019-41",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "‘ANNEX II(a)\nADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING STATUS\nArticle 1\nCommon provisions\nA.\nDefinition of origin\n1.\nFor the products listed in Article 2, the following rules may also apply instead of the rules set out in Annex II of Protocol 3 provided that such products respect the following conditions:\n(a) the required working or processing to be carried out on non-originating materials in order for such products to obtain originating status takes place in production facilities located in the territory of Jordan; and\n(b) the total work force of each production facility located in the territory of Jordan where such products are worked or processed contains a proportion of Syrian refugees equivalent to at least 15 % (calculated individually for each production facility).\n2.\nThe relevant proportion pursuant to subparagraph 1(b) shall be calculated at any point after the entry into force of this Annex and on an annual basis thereafter taking into account the number of Syrian refugees who are employed in formal and decent jobs and on a Full-Time Equivalent basis, and who have received a work permit valid for a minimum period of 12 months under the applicable legislation of Jordan.\n3.\nThe competent authorities of Jordan shall monitor that the eligible production facilities comply with the conditions set out in paragraph 1, shall grant to production facilities fulfilling such conditions an authorisation number and shall promptly withdraw such authorisation number where the production facilities no longer fulfil such conditions.\nB.\nProof of origin\n4.\nA proof of origin made out pursuant to this Annex shall contain the following statement in English: ‘Derogation – Annex II(a) of Protocol 3 – authorisation number granted by the competent authorities of Jordan’.\nC.\nAdministrative cooperation\n5.\nWhen, in accordance with Article 33(5) of this Protocol, as amended by Decision No 1/2006 of the EU-Jordan Association Council, the customs authorities of Jordan inform the European Commission or the requesting customs authorities of the Member States of the European Union (the ‘Member States’) of the results of the verification, they shall specify that the products listed in Article 2 fulfil the conditions set out in paragraph 1.\n6.\nWhere the verification procedure or any other available information appears to indicate that the conditions set out in paragraph 1 are not fulfilled, Jordan shall, on its own initiative or at the request of the European Commission or the customs authorities of the Member States, carry out appropriate inquiries or arrange for such inquiries to be carried out with due urgency to identify and prevent such violations. For that purpose, the European Commission or the customs authorities of the Member States may participate in the inquiries.\nD.\nReport, monitoring and review\n7.\nEach year after the entry into force of this Annex, Jordan shall submit a report to the European Commission on the operation and effects of this Annex, including production and export statistics at 8 digit level or the highest level of detail available for the products covered by the scheme. Jordan shall also submit a list identifying the production facilities in Jordan and specifying the percentage of Syrian refugees employed in each individual production facility on a year-by-year basis. Jordan shall also report, on a quarterly basis, on the overall number of active work permits or other measurable means corresponding to legal and active employment determined by the Association Committee. The Parties shall jointly review such reports and any issues relating to the implementation and monitoring of this Annex within the bodies established by the Association Agreement and in particular in the Sub-Committee on Industry, Trade and Services. The Parties shall also ensure the involvement of relevant international organisations, such as the International Labour Organisation and the World Bank, in the monitoring process.\n8.\nOnce Jordan achieves its target of facilitating a greater participation of Syrian refugees in the formal labour market by issuing at least 60 000 active work permits, or other measurable means corresponding to legal and active employment determined by the Association Committee, to Syrian refugees, the Parties shall apply the provisions of this Annex to all products covered by this Annex without the requirement to comply with the specific conditions set out in subparagraph 1(b).\n9.\nIf the Union considers that there is insufficient evidence of Jordan complying with the conditions set out in paragraph 8, the Union may refer the matter to the Association Committee. If the Association Committee fails to declare within 90 days of the referral of the matter that the conditions set out in paragraph 8 are met or to amend this Annex, the Union may decide that the specific conditions set out in subparagraph 1(b) shall apply.\nE.\nTemporary suspension\n10.\n(a) Without prejudice to paragraphs 8 and 9, the Union may, if it considers that there is insufficient evidence of Jordan or any specific production facility complying with the conditions set out in paragraphs 1, 2 and 3, refer the matter to the Association Committee. That referral shall identify whether the failure to comply with the conditions set out in paragraph 1 is attributable to Jordan or any specific production facility.\n(b) If the Association Committee fails to declare within 90 days of the referral of the matter that the conditions set out in paragraph 1 are met or to amend this Annex, the application of this Annex shall be suspended. The extent of the suspension shall be that identified in the referral of the Union to the Association Committee.\n(c) The Association Committee may also decide to extend the 90-day period. In that case, the suspension shall take effect where the Association Council has failed to take any of the actions identified in point (b) within the extended period of time.\n(d) The application of this Annex may resume if the Association Committee so decides.\n(e) In case of a suspension, this Annex shall continue to apply for a period of four months in relation to products which are, on the date of temporary suspension of the Annex, either in transit or in temporary storage in customs warehouses or in free zones in the Union, and for which a proof of origin was properly made out in accordance with the provisions of this Annex prior to the date of temporary suspension.\nF.\nSafeguard mechanism\n11.\nWhere a product listed in Article 2 benefiting from the application of this Annex is imported in such increased quantities and under such conditions as to cause, or threaten to cause, serious injury to Union producers of like or directly competitive products in all or part of the territory of the Union or serious disturbances in any sector of the economy of the Union, in accordance with Articles 24 and 26 of the Agreement, the Union may refer the matter for examination to the Association Committee. If within 90 days of the matter being referred to it, the Association Committee fails to adopt a decision putting an end to such serious injury or threat thereof or serious disturbances or if no other satisfactory solution has been reached, the application of this Annex shall be suspended with respect to that product, until the Association Committee adopts a decision declaring that they have ended or until a satisfactory solution has been reached by the Parties and is notified to the Association Committee.\nG.\nEntry into force and application\n12.\nThis Annex shall apply from the day of entry into force of the Association Committee decision to which it is attached and shall apply until 31 December 2030.\nArticle 2\nList of products and of required working and processing\nThe list of products to which this Annex applies and the rules of working and processing that may be applied as an alternative to those listed in Annex II are set out below.\nAnnex I to Protocol 3 of the Agreement containing the introductory notes to the list in Annex II to Protocol 3 of the Agreement applies mutatis mutandis to the list below, subject to the following amendments:\nIn Note 5.2, the following basic materials are added in the second paragraph:\nglass fibres;\nmetal fibres.\nIn Note 7.3, the text is replaced by the following:\nFor the purposes of headings ex 2707 and 2713, simple operations, such as cleaning, decanting, desalting, water-separation, filtering, colouring, marking, obtaining a sulphur-content as a result of mixing products with different sulphur-contents, or any combination of these operations or like operations, do not confer origin.\nFor the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.\nFor the special conditions relating to “specific processes”, see Introductory Note 7.2.\nA “group” is regarded as any part of the heading separated from the rest by a semi-colon.\nIn the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.\nThe following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.\nFor special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.\nSee Introductory Note 6.\nFor knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.\nSEMII – Semiconductor Equipment and Materials Institute Incorporated\nex Chapter 25\nSalt; sulphur; earths and stone; plastering materials, lime and cement; except for:\nManufacture from materials of any heading, except that of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex 2519\nCrushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia.\nManufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used.\nex Chapter 27\nMineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes, except for:\nManufacture from materials of any heading, except that of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex 2707\nOils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels.\nOperations of refining and/or one or more specific process(es)\nor\nother operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product.\n2710\nPetroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations; waste oils.\nOperations of refining and/or one or more specific process(es)\nor\nother operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product.\n2711\nPetroleum gases and other gaseous hydrocarbons.\nOperations of refining and/or one or more specific process(es)\nor\nother operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product.\n2712\nPetroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured.\nOperations of refining and/or one or more specific process(es)\nor\nother operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product.\n2713\nPetroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials.\nOperations of refining and/or one or more specific process(es)\nor\nother operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product.\nex Chapter 28\nInorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for:\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex 2811\nSulphur trioxide; and\nManufacture from sulphur dioxide\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex 2840\nSodium perborate;\nManufacture from disodium tetraborate pentahydrate\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\n2843\nColloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals\nManufacture from materials of any heading, including other materials of heading 2843.\nex 2852\n—\nMercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives.\nManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\n—\nMercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds.\nManufacture from materials of any heading. However, the value of all the materials of headings 2852, 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex Chapter 29\nOrganic chemicals; except for:\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\nex 2905\nMetal alcoholates of alcohols of this heading and of ethanol; except for:\nManufacture from materials of any heading, including other materials of heading 2905. However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nmanufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.\n2905 43;\n2905 44;\n2905 45\nMannitol; D-glucitol (sorbitol); Glycerol\nManufacture from materials of any sub-heading, except that of the product. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n2915\nSaturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives\nManufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 2932\n—\nInternal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives\nManufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n—\nCyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives\nManufacture from materials of any heading\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n2933\nHeterocyclic compounds with nitrogen hetero-atom(s) only\nManufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n2934\nNucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds\nManufacture from materials of any heading. However, the value of all the materials of headings 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 31\nFertilisers\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 32\nTanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 33\nEssential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3301\nEssential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils.\nManufacture from materials of any heading, including materials of a different ‘group’ in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 34\nSoap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, “dental waxes” and dental preparations with a basis of plaster, except for:\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3404\nArtificial waxes and prepared waxes:\nWith a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax\nManufacture from materials of any heading\nChapter 35\nAlbuminoidal substances; modified starches; glues; enzymes\nManufacture from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 37\nPhotographic or cinematographic goods\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 38\nMiscellaneous chemical products; except for:\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3803\nRefined tall oil\nRefining of crude tall oil\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3805\nSpirits of sulphate turpentine, purified\nPurification by distillation or refining of raw spirits of sulphate turpentine\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n3806 30\nEster gums\nManufacture from resin acids\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3807\nWood pitch (wood tar pitch)\nDistillation of wood tar\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n3809 10\nFinishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included: With a basis of amylaceous substances\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n3823\nIndustrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols\nManufacture from materials of any heading, including other materials of heading 3823\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n3824 60\nSorbitol other than that of sub-heading 2905 44\nManufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the exworks price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 39\nPlastics and articles thereof; except for:\nManufacture from materials of any heading, except that of the product.\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3907\n—\nCopolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)\nManufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n—\nPolyester\nManufacture from materials of any heading, except that of the product\nor\nManufacture from polycarbonate of tetrabromo-(bisphenol A)\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3920\nIonomer sheet or film\nManufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 3921\nFoils of plastic, metallised\nManufacture from highly-transparent polyester-foils with a thickness of less than 23 micron\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 40\nRubber and articles thereof; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n4012\nRetreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber:\n—\nRetreaded pneumatic, solid or cushion tyres, of rubber\nRetreading of used tyres\n—\nOther\nManufacture from materials of any heading, except those of headings 4011 and 4012\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 41\nRaw hides and skins (other than furskins) and leather; except for:\nManufacture from materials of any heading, except that of the product\n4101 to 4103\nRaw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split; raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not with wool on or split, other than those excluded by note 1(c) to Chapter 41; other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split, other than those excluded by note 1(b) or 1(c) to Chapter 41\nManufacture from materials of any heading\n4104 to 4106\nTanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared\nRe-tanning of tanned or pre-tanned hides and skins of sub-headings 4104 11, 4104 19, 4105 10, 4106 21, 4106 31 or 4106 91,\nor\nManufacture from materials of any heading, except that of the product\n4107, 4112, 4113\nLeather further prepared after tanning or crusting\nManufacture from materials of any heading, except that of the product. However, materials of sub-headings 4104 41, 4104 49, 4105 30, 4106 22, 4106 32 and 4106 92 may be used only if a re-tanning operation of the tanned or crust hides and skins in the dry state takes place\nChapter 42\nArticles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 43\nFurskins and artificial fur; manufactures thereof; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n4301\nRaw furskins (including heads, tails, paws and other pieces or cuttings, suitable for furrier's use), other than raw hides and skins of heading 4101, 4102 or 4103\nManufacture from materials of any heading\nex 4302\nTanned or dressed furskins, assembled:\n—\nPlates, crosses and similar forms\nBleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins\n—\nOther\nManufacture from non-assembled, tanned or dressed furskins\n4303\nArticles of apparel, clothing accessories and other articles of furskin\nManufacture from non-assembled tanned or dressed furskins of heading 4302\nex Chapter 44\nWood and articles of wood; wood charcoal; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 4407\nWood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed\nPlaning, sanding or end-jointing\nex 4408\nSheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed\nSplicing, planing, sanding or endjointing\nex 4410 to ex 4413\nBeadings and mouldings, including moulded skirting and other moulded boards\nBeading or moulding\nex 4415\nPacking cases, boxes, crates, drums and similar packings, of wood\nManufacture from boards not cut to size\nex 4418\n—\nBuilders' joinery and carpentry of wood\nManufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used\n—\nBeadings and mouldings\nBeading or moulding\nex 4421\nMatch splints; wooden pegs or pins for footwear\nManufacture from wood of any heading, except drawn wood of heading 4409\nex Chapter 51\nWool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:\nManufacture from materials of any heading, except that of the product\n5106 to 5110\nYarn of wool, of fine or coarse animal hair or of horsehair\nSpinning of natural fibres or extrusion of man-made fibres accompanied by spinning\n5111 to 5113\nWoven fabrics of wool, of fine or coarse animal hair or of horsehair:\nWeaving\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\nex Chapter 52\nCotton; except for:\nManufacture from materials of any heading, except that of the product\n5204 to 5207\nYarn and thread of cotton\nSpinning of natural fibres or extrusion of man-made fibres accompanied by spinning\n5208 to 5212\nWoven fabrics of cotton:\nWeaving\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\nex Chapter 53\nOther vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:\nManufacture from materials of any heading, except that of the product\n5306 to 5308\nYarn of other vegetable textile fibres; paper yarn\nSpinning of natural fibres or extrusion of man-made fibres accompanied by spinning\n5309 to 5311\nWoven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:\nWeaving\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n5401 to 5406\nYarn, monofilament and thread of man-made filaments\nExtrusion of man-made fibres accompanied by spinning or spinning of natural fibres\n5407 and 5408\nWoven fabrics of man-made filament yarn:\nWeaving\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n5501 to 5507\nMan-made staple fibres\nExtrusion of man-made fibres\n5508 to 5511\nYarn and sewing thread of man-made staple fibres\nSpinning of natural fibres or extrusion of man-made fibres accompanied by spinning\n5512 to 5516\nWoven fabrics of man-made staple fibres:\nWeaving\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\nex Chapter 56\nWadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:\nExtrusion of man-made fibres accompanied by spinning or spinning of natural fibres\nor\nFlocking accompanied by dyeing or printing\n5602\nFelt, whether or not impregnated, coated, covered or laminated:\n—\nNeedleloom felt\nExtrusion of man-made fibres accompanied by fabric formation,\nHowever:\npolypropylene filament of heading 5402,\npolypropylene fibres of heading 5503 or 5506, or\npolypropylene filament tow of heading 5501,\nof which the denomination in all cases of a single filament or fibre is less than 9 decitex,\nmay be used, provided that their total value does not exceed 40 % of the ex-works price of the product\nor\nFabric formation alone in the case of felt made from natural fibres\n—\nOther\nExtrusion of man-made fibres accompanied by fabric formation,\nor\nFabric formation alone in the case of other felt made from natural fibres\n5603\nNonwovens, whether or not impregnated, coated, covered or laminated\nAny non-woven process including needle punching\n5604\nRubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics:\n—\nRubber thread and cord, textile covered\nManufacture from rubber thread or cord, not textile covered\nOther\n—\nExtrusion of man-made fibres accompanied by spinning or spinning of natural fibres\n5605\nMetallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal\nExtrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibres\n5606\nGimped yarn, and strip and the like of heading 5404 or 5405, gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn\nExtrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibres\nor\nSpinning accompanied with flocking\nor\nFlocking accompanied by dyeing\nChapter 57\nCarpets and other textile floor coverings:\nSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving\nor\nManufacture from coir yarn or sisal yarn or jute yarn\nor\nFlocking accompanied by dyeing or by printing\nor\nTufting accompanied by dyeing or by printing\nExtrusion of man-made fibres accompanied by non-woven techniques including needle punching\nHowever:\npolypropylene filament of heading 5402,\npolypropylene fibres of heading 5503 or 5506, or\npolypropylene filament tow of heading 5501,\nof which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product\nJute fabric may be used as a backing\nex Chapter 58\nSpecial woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for:\nWeaving\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n5805\nHand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up\nManufacture from materials of any heading, except that of the product\n5810\nEmbroidery in the piece, in strips or in motifs\nManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product\n5901\nTextile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations\nWeaving accompanied by dyeing or by flocking or by coating\nor\nFlocking accompanied by dyeing or printing\n5902\nTyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:\n—\nContaining not more than 90 % by weight of textile materials\nWeaving\n—\nOther\nExtrusion of man-made fibres accompanied by weaving\n5903\nTextile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902\nWeaving accompanied by dyeing or by coating\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n5904\nLinoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape\nWeaving accompanied by dyeing or by coating\n5905\nTextile wall coverings:\n—\nImpregnated, coated, covered or laminated with rubber, plastics or other materials\nWeaving accompanied by dyeing or by coating\n—\nOther\nSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weaving\nor\nWeaving accompanied by dyeing or by coating\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product:\n5906\nRubberised textile fabrics, other than those of heading 5902:\n—\nKnitted or crocheted fabrics\nSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting\nor\nKnitting accompanied by dyeing or by coating\nor\nDyeing of yarn of natural fibres accompanied by knitting\n—\nOther fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials\nExtrusion of man-made fibres accompanied by weaving\n—\nOther\nWeaving accompanied by dyeing or by coating\nor\nDyeing of yarn of natural fibres accompanied by weaving\n5907\nTextile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like\nWeaving accompanied by dyeing or by flocking or by coating\nor\nFlocking accompanied by dyeing or by printing\nor\nPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n5908\nTextile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated:\n—\nIncandescent gas mantles, impregnated\nManufacture from tubular knitted gas-mantle fabric\n—\nOther\nManufacture from materials of any heading, except that of the product\n5909 to 5911\nTextile articles of a kind suitable for industrial use:\n—\nPolishing discs or rings other than of felt of heading 5911\nWeaving\n—\nWoven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911\nWeaving\n—\nOther\nExtrusion of man-made filament yarn or spinning of natural or man-made staple fibres, accompanied by weaving\nor\nWeaving accompanied by dyeing or coating\nChapter 60\nKnitted or crocheted fabrics\nSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting\nor\nKnitting accompanied by dyeing or by flocking or by coating\nor\nFlocking accompanied by dyeing or by printing\nor\nDyeing of yarn of natural fibres accompanied by knitting\nor\nTwisting or texturing accompanied by knitting provided that the value of the non-twisted/non-textured yarns used does not exceed 47,5 % of the ex-works price of the product\nChapter 61\nArticles of apparel and clothing accessories, knitted or crocheted:\n—\nObtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form\nManufacture from fabric\n—\nOther\nSpinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting (knitted to shape products)\nor\nDyeing of yarn of natural fibres accompanied by knitting (knitted to shape products)\nex Chapter 62\nArticles of apparel and clothing accessories, not knitted or crocheted; except for:\nManufacture from fabric\n6213 and 6214\nHandkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:\n—\nEmbroidered\nWeaving accompanied by making-up (including cutting)\nor\nManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product\nor\nMaking-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n—\nOther\nWeaving accompanied by making-up (including cutting)\nor\nMaking-up followed by printing accompanied by at least two preparatory finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product\n6217\nOther made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212:\n—\nEmbroidered\nWeaving accompanied by making-up (including cutting)\nor\nManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product\n—\nFire-resistant equipment of fabric covered with foil of aluminised polyester\nWeaving accompanied by making-up (including cutting)\nor\nCoating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product accompanied by making-up (including cutting)\n—\nInterlinings for collars and cuffs, cut out\nManufacture from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product\nex Chapter 63\nOther made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:\nManufacture from materials of any heading, except that of the product\n6301 to 6304\nBlankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles:\n—\nOf felt, of nonwovens\nAny non-woven process including needle punching accompanied by making up (including cutting)\n—\nOther:\n—\nEmbroidered\nWeaving or knitting accompanied by making-up (including cutting)\nor\nManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product\n—\nOther\nWeaving or knitting accompanied by making-up (including cutting)\n6305\nSacks and bags, of a kind used for the packing of goods\nWeaving or knitting and making-up (including cutting)\n6306\nTarpaulins, awnings and sun blinds; tents; sails for boats, sailboards or landcraft; camping goods:\n—\nOf nonwovens\nAny non-woven process including needle punching accompanied by making up (including cutting)\n—\nOther\nWeaving accompanied by making-up (including cutting)\nor\nCoating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product accompanied by making-up (including cutting)\n6307\nOther made-up articles, including dress patterns\nManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product\n6308\nSets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale\nEach item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 25 % of the ex-works price of the set\nex Chapter 64\nFootwear, gaiters and the like; parts of such articles; except for:\nManufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406\n6406\nParts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof\nManufacture from materials of any heading, except that of the product\nChapter 65\nHeadgear and parts thereof\nManufacture from materials of any heading, except that of the product\nex Chapter 68\nArticles of stone, plaster, cement, asbestos, mica or similar materials, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 6803\nArticles of slate or of agglomerated slate\nManufacture from worked slate\nex 6812\nArticles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate\nManufacture from materials of any heading\nex 6814\nArticles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials\nManufacture from worked mica (including agglomerated or reconstituted mica)\nChapter 69\nCeramic products\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 70\nGlass and glassware, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n7006\nGlass of heading 7003, 7004 or 7005,bent, edge-worked, engraved, drilled,\n—\nGlass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standards\nManufacture from non-coated glass-plate substrate of heading 7006\n—\nOther\nManufacture from materials of heading 7001\n7010\nCarboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass\nManufacture from materials of any heading, except that of the product\nor\nCutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product\n7013\nGlassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018)\nManufacture from materials of any heading, except that of the product\nor\nCutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product\nor\nHand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 % of the ex-works price of the product\nex 7019\nArticles (other than yarn) of glass fibres\nManufacture from:\nuncoloured slivers, rovings, yarn or chopped strands, or\nglass wool\nex Chapter 71\nNatural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n7106, 7108 and 7110\nPrecious metals:\n—\nUnwrought\nManufacture from materials of any heading, except those of headings 7106, 7108 and 7110\nor\nElectrolytic, thermal or chemical separation of precious metals of heading 7106, 7108 or 7110\nor\nFusion and/or alloying of precious metals of heading 7106, 7108 or 7110 with each other or with base metals\nSemi-manufactured or in powder form\nManufacture from unwrought precious metals\nex 7107, ex 7109 and ex 7111\nMetals clad with precious metals, semi-manufactured\nManufacture from metals clad with precious metals, unwrought\n7115\nOther articles of precious metal or of metal clad with precious metal\nManufacture from materials of any heading, except that of the product\n7117\nImitation jewellery\nManufacture from materials of any heading, except that of the product\nor\nManufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product\nex Chapter 73\nArticles of iron or steel; except for:\nManufacture from materials of any heading, except that of the product\nex 7301\nSheet piling\nManufacture from materials of heading 7207\n7302\nRailway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails\nManufacture from materials of heading 7206\n7304, 7305 and 7306\nTubes, pipes and hollow profiles, of iron (other than cast iron) or steel\nManufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7211, 7212, 7218, 7219, 7220 or 7224\nex 7307\nTube or pipe fittings of stainless steel\nTurning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product\n7308\nStructures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel\nManufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used\nex 7315\nSkid chain\nManufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product\nex Chapter 74\nCopper and articles thereof; except for:\nManufacture from materials of any heading, except that of the product\n7403\nRefined copper and copper alloys, unwrought\nManufacture from materials of any heading\nex Chapter 76\nAluminium and articles thereof; except for:\nManufacture from materials of any heading, except that of the product\n7601\nUnwrought aluminium\nManufacture from materials of any heading\n7607\nAluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm\nManufacture from materials of any heading, except that of the product and heading 7606\nex Chapter 78\nLead and articles thereof, except for:\nManufacture from materials of any heading, except that of the product\n7801\nUnwrought lead:\n—\nRefined lead\nManufacture from materials of any heading\n—\nOther\nManufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used\nChapter 80\nTin and articles thereof\nManufacture from materials of any heading, except that of the product\nex Chapter 82\nTools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8206\nTools of two or more of the headings 8202 to 8205, put up in sets for retail sale\nManufacture from materials of any heading, except those of headings 8202 to 8205. However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set\n8211\nKnives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades therefor\nManufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used\n8214\nOther articles of cutlery (for example; hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files)\nManufacture from materials of any heading, except that of the product. However, handles of base metal may be used\n8215\nSpoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware\nManufacture from materials of any heading, except that of the product. However, handles of base metal may be used\nex Chapter 83\nMiscellaneous articles of base metal; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 8302\nOther mountings, fittings and similar articles suitable for buildings, and automatic door closers\nManufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product\nex 8306\nStatuettes and other ornaments, of base metal\nManufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product\nex Chapter 84\nNuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8401\nNuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8407\nSpark-ignition reciprocating or rotary internal combustion piston engines\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8408\nCompression-ignition internal combustion piston engines (diesel or semi-diesel engines\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8427\nFork-lift trucks; other works trucks fitted with lifting or handling equipment\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8482\nBall or roller bearings\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 85\nElectrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8501, 8502\nElectric motors and generators; Electric generating sets and rotary converters\nManufacture from materials of any heading, except that of the product and of heading 8503\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8513\nPortable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8519\nSound recording and sound reproducing apparatus\nManufacture from materials of any heading, except that of the product and of heading 8522\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8521\nVideo recording or reproducing apparatus, whether or not incorporating a video tuner\nManufacture from materials of any heading, except that of the product and of heading 8522\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8523\nPrepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8525\nTransmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and other video camera recorders\nManufacture from materials of any heading, except that of the product and of heading 8529\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8526\nRadar apparatus, radio navigational aid apparatus and radio remote control apparatus\nManufacture from materials of any heading, except that of the product and of heading 8529\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8527\nReception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock\nManufacture from materials of any heading, except that of the product and of heading 8529\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8528\nMonitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus\nManufacture from materials of any heading, except that of the product and of heading 8529\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8535 to 8537\nElectrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity\nManufacture from materials of any heading, except that of the product and of heading 8538\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8540 11 and 8540 12\nCathode ray television picture tubes, including video monitor cathode ray tubes\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 8542 31 to ex 8542 33 and ex 8542 39\nMonolithic integrated circuits\nManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product\nor\nThe operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a non-party\n8544\nInsulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8545\nCarbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8546\nElectrical insulators of any material\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8547\nInsulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8548\nWaste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 86\nRailway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds.\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 87\nVehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n8711\nMotorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 90\nOptical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9002\nLenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9033\nParts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 91\nClocks and watches and parts thereof\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nChapter 94\nFurniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex Chapter 95\nToys, games and sports requisites; parts and accessories thereof, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\nex 9506\nGolf clubs and parts thereof\nManufacture from materials of any heading, except that of the product. However, roughly-shaped blocks for making golf-club heads may be used\nex Chapter 96\nMiscellaneous manufactured articles, except for:\nManufacture from materials of any heading, except that of the product\nor\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9601 and 9602\nWorked ivory, bone, tortoiseshell, horn, antlers, coral, mother-of-pearl and other animal carving material, and articles of these materials (including articles obtained by moulding.\nWorked vegetable or mineral carving material and articles of these materials; moulded or carved articles of wax, of stearin, of natural gums or natural resins or of modelling pastes, and other moulded or carved articles, not elsewhere specified or included; worked, unhardened gelatine (except gelatine of heading 3503) and articles of unhardened gelatin\nManufacture from materials of any heading\n9603\nBrooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorized, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers, squeegees (other than roller squeegees)\nManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9605\nTravel sets for personal toilet, sewing or shoe or clothes cleaning\nEach item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set\n9606\nButtons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks\nManufacture:\nfrom materials of any heading, except that of the product, and\nin which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9608\nBall-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencilholders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609\nManufacture from materials of any heading, except that of the product. However, nibs or nib-points of the same heading as the product may be used\n9612\nTypewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes\nManufacture:\nfrom materials of any heading, except that of the product, and\nin which the value of all the materials used does not exceed 70 % of the ex-works price of the product\n9613 20\nPocket lighters, gas fuelled, refillable\nManufacture in which the total value of the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product\n9614\nSmoking pipes (including pipe bowls) and cigar or cigarette holders, and parts thereof\nManufacture from materials of any heading\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Decision No 1/2006 of the EU-Jordan Association Council of 15 June 2006 amending Protocol 3 to the Euro-Mediterranean Agreement, concerning the definition of the concept of originating products and methods of administrative cooperation (OJ L 209, 31.7.2006, p. 30)."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "For the special conditions relating to “specific processes”, see Introductory Note 7.2."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "A “group” is regarded as any part of the heading separated from the rest by a semi-colon."
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %."
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5."
    },
    {
      "type": "footnote",
      "label": "f8",
      "text": "See Introductory Note 6."
    },
    {
      "type": "footnote",
      "label": "f9",
      "text": "For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6."
    },
    {
      "type": "footnote",
      "label": "f10",
      "text": "SEMII – Semiconductor Equipment and Materials Institute Incorporated"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2019/41/annex",
    "retrieved_at": "2026-11-01T15:12:52.238673+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}