{
  "url": "https://openlegislation.uk/eu-decision-2020-167/annex-II",
  "json_url": "https://openlegislation.uk/eu-decision-2020-167/annex-II.json",
  "legislation": "eudn/2020/167",
  "legislation_title": "Commission Implementing Decision (EU) 2020/167 of 5 February 2020 on the harmonised standards for radio equipment drafted in support of Directive 2014/53/EU of the European Parliament and of the Council",
  "legislation_url": "https://openlegislation.uk/eu-decision-2020-167",
  "path": "annex/II",
  "kind": "annex",
  "number": "II",
  "heading": null,
  "text": "No\nReference of the standard\n1.\nEN 300 698 V2.3.1\nRadio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard for access to radio spectrum and for features for emergency services\nNotice: Compliance with this harmonised standard does not confer a presumption of conformity to the essential requirement set out in Article 3(2) of Directive 2014/53/EU if, in clause 8.2.3 of this harmonised standard, the sentence ‘With the output power switch set at maximum, the carrier power shall be within ±1,5 dB of the rated output power under normal test condition s’ is applied.\n2.\nEN 302 065-3 V2.1.1\nShort Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of Article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications\nNotice: This harmonised standard does not set out technical specifications for ‘trigger-before-transmit techniques’. Implementing Decision (EU) 2019/785, however, imposes, as of 16 November 2019, technical requirements to be used within the bands 3,8-4,2 GHz and 6-8,5 GHz for vehicular access systems using trigger-before-transmit. Therefore compliance with this harmonised standard does not ensure compliance with Implementing Decision (EU) 2019/785 and accordingly does not confer a presumption of conformity with those essential requirements set out in Article 3(2) of Directive 2014/53/EU which relate to ‘trigger-before-transmit techniques’.\n3.\nEN 303 520 V1.2.1\nShort Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum\nNotice: Compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU if any of the following are applied:\nwith respect to clause B.1 of Annex B: ‘The manufacturer and test laboratory may agree on alternative suitable implementation of human torso simulator, which shall be then fully described in the test report’;\nwith respect to clause C.1 of Annex C: ‘Alternatively, the manufacturer and test laboratory may agree to use a Semi-Anechoic Room, the setup of which shall be then fully described in the test report’.\nNotice: The temperature referred to in clause B.2 of Annex B shall reflect the intended use.\n4.\nEN 301 908-13 V13.1.1\nIMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)\nNotice : This harmonised standard does not contain antenna performance parameters and compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU as regards those parameters.\n5.\nEN 302 217-2 V3.2.2\nFixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to radio spectrum\nNotice : Compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU if note 2 of clause 4.3.2 of this harmonised standard is applied;\nNotice : As regards the radio equipment covered by either clause H.3.4, I.3.4 or J.3.4 of this harmonised standard, compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU in case that the appropriate test methods are not carried out in order to demonstrate compliance, respectively, with either clause H.3.4, I.3.4 or J.3.4 of this harmonised standard.\n6.\nEN 303 213-6-1 V3.1.1\nAdvanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard for access to radio spectrum for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW\nNotice : As regards clause 4.2.1.5 of this harmonised standard, compliance of this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU to equipment not combining a ‘ WR112/R84 taper section and a WR90/R100 Waveguide ’ as in note 1 of Section 1 of this harmonised standard. The waveguide is requested to have a continuously unobstructed transmission path (unperturbed/pure) and a minimum length of 20 times the waveguide cut-off wavelength in that operational mode.\n7.\nEN 303 345-2 V1.1.1\nBroadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum\nNotice : Compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU as regards the receiver unwanted emissions in the spurious domain.\n8.\nEN 303 345-5 V1.1.1\nBroadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for access to radio spectrum\nNotice : Compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU as regards the receiver unwanted emissions in the spurious domain.\n9.\nEN 303 364-3 V1.1.1\nPrimary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500 MHz to 10 000 MHz (X band)\nNotice : As regards clause 4.2.1.4 of this harmonised standard, compliance with this harmonised standard does not confer a presumption of conformity with the essential requirement set out in Article 3(2) of Directive 2014/53/EU to equipment not combining a ‘ WR112/R84 taper section and a WR90/R100 Waveguide ’ as in note 1 of Section 1 of this harmonised standard. The waveguide is requested to have a continuously unobstructed transmission path (unperturbed/pure) and a minimum length of 20 times the waveguide cut-off wavelength in that operational mode.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Inserted by Commission Implementing Decision (EU) 2020/1562 of 26 October 2020 amending Implementing Decision (EU) 2020/167 as regards harmonised standards for certain radio equipment concerning advanced surface movement guidance and control systems, primary surveillance radars, broadcast sound receivers, international mobile telecommunications equipment and fixed radio systems."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2020/167/annex/II",
    "retrieved_at": "2026-11-01T15:12:23.563983+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}