Division 2.1(a) Restrictions on Substances of Very High Concern (SVHCs)
United Kingdom
Substances meeting the criteria referred to in Article 57 of Regulation (EC) No 1907/2006 that have been identified according to the procedure described in Article 59 of that Regulation and included in the candidate list of substances of very high concern for authorisation shall not be intentionally added to the product at concentrations greater than 0,10 % (weight by weight). The same restriction shall apply to the sub-assemblies forming part of the product that are listed in Table 2. No derogation from this requirement shall be granted.
Table 2
Sub-assemblies and component parts to which criterion 2.1(a) shall apply
| Printed Circuit Boards (Printed Wiring Boards, populated motherboards, power boards (power supply units) and module boards ) >10 cm2 |
| Electrical wiring/cables (aggregated) |
| External cables (Power cable (AC and DC power cords), modem cable and LAN cable if applicable, HDMI cable and RCA cable) |
| External housing (Back cover, front cover (bezel decoration) and stands) |
| External housing of remote control |
| LED backlights (LED arrays) |
In communicating this requirement to suppliers of the listed sub-assemblies/component parts, applicants may pre-screen the REACH Candidate List using the IEC 62474 declarable substance listf1. The screening shall be based on identification of the potential for presence of substances in the product.
Assessment and verification: The applicant shall compile declarations of the non-presence of SVHCs at or above the specified concentration limit for the product and the sub-assemblies identified in Table 2. Declarations shall be with reference to the latest version of the candidate list published by ECHA f2 on the submission date of the EU Ecolabel application. Where declarations are made based on a pre-screening of the candidate list using IEC 62474, the screened list given to sub-assembly suppliers shall also be provided by the applicant. The version of the IEC 62474 declarable substance list used shall reflect the latest version of the candidate list.
The declarations can also be provided directly to competent bodies by any supplier in the applicant’s supply chain.
Annotations
Footnotes
- f1
-
International Electrotechnical Commission (IEC), IEC 62474: Material declaration for products of and for the electrotechnical industry, http://std.iec.ch/iec62474
- f2
-
ECHA, Candidate List of substances of very high concern for Authorisation, http://www.echa.europa.eu/candidate-list-table
Notes on Division 2.1
Footnotes
- f1
-
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).
- f2
-
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).