{
  "url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.11/division-1.1.11.1/division-BATn1",
  "json_url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.11/division-1.1.11.1/division-BATn1.json",
  "legislation": "eudn/2020/2009",
  "legislation_title": "Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2020-2009",
  "path": "annex/division/1/division/1.1/division/1.1.11/division/1.1.11.1/division/BATn1",
  "kind": "division",
  "number": "BAT 14",
  "heading": "In order to reduce VOC emissions from the production and storage areas, BAT is to use technique (a) and an appropriate combination of the other techniques given below.",
  "text": "Technique\nDescription\nApplicability\n(a)\nSystem selection, design and optimisation\nAn off-gas system is selected, designed and optimised taking into account parameters such as:\namount of extracted air;\ntype and concentration of solvents in extracted air;\ntype of treatment system (dedicated/centralised);\nhealth and safety;\nenergy efficiency.\nThe following order of priority for the system selection may be considered:\nsegregation of off-gases with high and low VOC concentrations;\ntechniques to homogenise and increase the VOC concentration (see BAT 16 (b) and (c));\ntechniques for the recovery of solvents in off-gases (see BAT 15);\nVOC abatement techniques with heat recovery (see BAT 15);\nVOC abatement techniques without heat recovery (see BAT 15).\nGenerally applicable.\n(b)\nAir extraction as close as possible to the point of application of VOC-containing materials\nAir extraction as close as possible to the point of application with full or partial enclosure of solvent application areas (e.g. coaters, application machines, spray booths). Extracted air may be treated by an off-gas treatment system.\nMay not be applicable where enclosure leads to difficult machinery access during operation.\nApplicability may be restricted by the shape and size of the area to be enclosed.\n(c)\nAir extraction as close as possible to the point of preparing paints/coatings/adhesives/inks\nAir extraction as close as possible to the point of preparing paints/coatings/adhesives/inks (e.g. mixing area). Extracted air may be treated by an off-gas treatment system.\nOnly applicable where paints/coatings/adhesives/inks are prepared.\n(d)\nExtraction of air from the drying/curing processes\nThe curing ovens/dryers are equipped with an air extraction system. Extracted air may be treated by an off-gas treatment system.\nOnly applicable to drying/curing processes.\n(e)\nMinimisation of fugitive emissions and heat losses from the ovens/dryers either by sealing the entrance and the exit of the curing ovens/dryers or by applying sub-atmospheric pressure in drying\nThe entrance to and the exit from curing ovens/dryers are sealed to minimise fugitive VOC emissions and heat losses. The sealing may be ensured by air jets or air knives, doors, plastic or metallic curtains, doctor blades, etc. Alternatively, ovens/dryers are kept under sub-atmospheric pressure.\nOnly applicable when curing ovens/dryers are used.\n(f)\nExtraction of air from the cooling zone\nWhen substrate cooling takes place after drying/curing, the air from the cooling zone is extracted and may be treated by an off-gas treatment system.\nOnly applicable when substrate cooling takes place after drying/curing.\n(g)\nExtraction of air from storage of raw materials, solvents and solvent-containing wastes\nAir from raw material stores and/or individual containers for raw materials, solvents and solvent-containing wastes is extracted and may be treated by an off-gas treatment system.\nMay not be applicable for closed containers or for storage of raw materials, solvents and solvent-containing wastes with a low vapour pressure and low toxicity.\n(h)\nExtraction of air from cleaning areas\nAir from the areas where machine parts and equipment are cleaned with organic solvents, either by hand or automatically, is extracted and may be treated by an off-gas treatment system.\nOnly applicable to areas where machine parts and equipment are cleaned with organic solvents.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2020/2009/annex/division/1/division/1.1/division/1.1.11/division/1.1.11.1/division/BATn1",
    "retrieved_at": "2026-11-01T15:12:03.527850+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}