# Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance), Division BAT 16: In order to reduce the energy consumption of the VOC abatement system, BAT is to use one or a combination of the techniques given below.

Extent: E+W+S+N.I.

Technique
Description
Applicability
(a)
Maintaining the VOC concentration sent to the off-gas treatment system by using variable-frequency drive fans
Use of a variable-frequency drive fan with centralised off-gas treatment systems to modulate the airflow to match the exhaust from the equipment that may be in operation.
Only applicable to central thermal off-gas treatment systems in batch processes such as printing.
(b)
Internal concentration of solvents in the off-gases
Off-gases are recirculated within the process (internally) in the curing ovens/dryers and/or in spray booths, so the VOC concentration in the off-gases increases and the abatement efficiency of the off-gas treatment system increases.
Applicability may be limited by health and safety factors such as the LEL, and product quality requirements or specifications.
(c)
External concentration of solvents in the off-gases through adsorption
The concentration of solvent in off-gases is increased by a continuous circular flow of the spray booth process air, possibly combined with curing oven/dryer off-gases, through adsorption equipment. This equipment can include:
fixed bed adsorber with activated carbon or zeolite;
fluidised bed adsorber with activated carbon;
rotor adsorber with activated carbon or zeolite;
molecular sieve.
Applicability may be restricted where the energy demand is excessive due to the low VOC content.
(d)
Plenum technique to reduce waste gas volume
Off-gases from curing ovens/dryers are sent to a large chamber (plenum), and partly recirculated as inlet air in the curing ovens/dryers. The surplus air from the plenum is sent to the off-gas treatment system. This cycle increases the VOC content of the curing ovens/dryers’ air and decreases the waste gas volume.
Generally applicable.

---
Source: https://www.legislation.gov.uk/eudn/2020/2009/annex/division/1/division/1.1/division/1.1.11/division/1.1.11.1/division/BATn3 (the official version)
Page: https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.11/division-1.1.11.1/division-BATn3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

