{
  "url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.11/division-1.1.11.3/division-BAT",
  "json_url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.11/division-1.1.11.3/division-BAT.json",
  "legislation": "eudn/2020/2009",
  "legislation_title": "Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2020-2009",
  "path": "annex/division/1/division/1.1/division/1.1.11/division/1.1.11.3/division/BAT",
  "kind": "division",
  "number": "BAT 18",
  "heading": "In order to reduce dust emissions in waste gases from substrate surface preparation, cutting, coating application and finishing processes for the sectors and processes listed in Table 2, BAT is to use one or a combination of the techniques given below.",
  "text": "Technique\nDescription\n(a)\nWet separation spray booth (flushed impact panel)\nA water curtain cascading vertically down the spray cabin rear panel captures paint particles from overspray. The water-paint mixture is captured in a reservoir and the water is recirculated.\n(b)\nWet scrubbing\nPaint particles and other dust in the off-gas are separated in scrubber systems by intensive mixing of the off-gas with water. (For VOC removal, see BAT 15 (c).)\n(c)\nDry overspray separation with pre-coated material\nA dry paint overspray separation process using membrane filters combined with limestone as pre-coating material to prevent fouling of the membranes.\n(d)\nDry overspray separation using filters\nMechanical separation system, e.g. using cardboard, fabric or sinter.\n(e)\nElectrostatic precipitator\nIn electrostatic precipitators, particles are charged and separated under the influence of an electrical field. In a dry electrostatic precipitator (ESP), the collected material is mechanically removed (e.g. by shaking, vibration, compressed air). In a wet ESP, it is flushed with a suitable liquid, usually a water-based separation agent.\nTable 2\nBAT-associated emission levels (BAT-AELs) for dust emissions in waste gases\nParameter\nSector\nProcess\nUnit\nBAT-AEL(Daily average or average over the sampling period)\nDust\nCoating of vehicles\nSpray coating\nmg/Nm3\n< 1–3\nCoating of other metal and plastic surfaces\nSpray coating\nCoating of aircraft\nPreparation (e.g. sanding, blasting), coating\nCoating and printing of metal packaging\nSpray application\nCoating of wooden surfaces\nPreparation, coating\nThe associated monitoring is given in BAT 11.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2020/2009/annex/division/1/division/1.1/division/1.1.11/division/1.1.11.3/division/BAT",
    "retrieved_at": "2026-11-01T15:12:03.527850+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}