# Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance), Division BAT 11: BAT is to monitor emissions in waste gases with at least the frequency given below and in accordance with EN standards. If EN standards are not available, BAT is to use ISO, national or other international standards that ensure the provision of data of an equivalent scientific quality.

Extent: E+W+S+N.I.

To the extent possible, the measurements are carried out at the highest expected emission state under normal operating conditions.
In the case of a TVOC load of less than 0,1 kg C/h, or in the case of an unabated and stable TVOC load of less than 0,3 kg C/h, the monitoring frequency may be reduced to once every 3 years or the measurement may be replaced by calculation provided that it ensures the provision of data of an equivalent scientific quality.
For the thermal treatment of off-gases, the temperature in the combustion chamber is continuously measured. This is combined with an alarm system for temperatures falling outside the optimised temperature window.
Generic EN standards for continuous measurements are EN15267-1, EN15267-2, EN15267-3 and EN 14181.
The monitoring only applies if DMF is used in the processes.
In the absence of an EN standard, the measurement includes the DMF contained in the condensed phase.
In the case of a stack with a TVOC load of less than 0,1 kg C/h, the monitoring frequency may be reduced to once every 3 years.
Substance/Parameter
Sectors/Sources
Standard(s)
Minimum monitoring frequency
Monitoring associated with
Dust
Coating of vehicles – Spray coating
EN 13284-1
Once every year
BAT 18
Coating of other metal and plastic surfaces – Spray coating
Coating of aircraft – Preparation (e.g. sanding, blasting) and coating
Coating and printing of metal packaging – Spray application
Coating of wooden surfaces – Preparation and coating
TVOC
All sectors
Any stack with a TVOC load < 10 kg C/h
EN 12619
Once every year
BAT 14, BAT 15
Any stack with a TVOC load ≥ 10 kg C/h
Generic EN standards
Continuous
DMF
Coating of textiles, foils and paper
No EN standard available
Once every three months
BAT 15
NOX
Thermal treatment of off-gases
EN 14792
Once every year
BAT 17
CO
Thermal treatment of off-gases
EN 15058
Once every year
BAT 17

---
Source: https://www.legislation.gov.uk/eudn/2020/2009/annex/division/1/division/1.1/division/1.1.9/division/1.1.9.2/division/BAT (the official version)
Page: https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.9/division-1.1.9.2/division-BAT
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

