# Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance), Division BAT 12: BAT is to monitor emissions to water with at least the frequency given below and in accordance with EN standards. If EN standards are not available, BAT is to use ISO, national or other international standards that ensure the provision of data of an equivalent scientific quality.

Extent: E+W+S+N.I.

The monitoring only applies in the case of direct discharge to a receiving water body.
The monitoring frequency may be reduced to once every 3 months if the emission levels are proven to be sufficiently stable.
In the case of batch discharge that is less frequent than the minimum monitoring frequency, monitoring is carried out once per batch.
TOC monitoring and COD monitoring are alternatives. TOC monitoring is the preferred option because it does not rely on the use of very toxic compounds.
Monitoring of Cr(VI) only applies if chromium(VI) compounds are used in the processes.
In the case of indirect discharge to a receiving water body, the monitoring frequency may be reduced if the downstream waste water treatment plant is designed and equipped appropriately to abate the pollutants concerned.
Monitoring of Cr only applies if chromium compounds are used in the processes.
Monitoring of F- only applies if fluorine compounds are used in the processes.
Substance/Parameter
Sector
Standard(s)
Minimum monitoring frequency
Monitoring associated with
TSS
Coating of vehicles
EN 872
Once every month
BAT 21
Coil coating
Coating and printing of metal packaging (only for DWI cans)
COD
Coating of vehicles
No EN standard available
Coil coating
Coating and printing of metal packaging (only for DWI cans)
TOC
Coating of vehicles
EN 1484
Coil coating
Coating and printing of metal packaging (only for DWI cans)
Cr(VI)
Coating of aircraft
EN ISO 10304-3 or EN ISO 23913
Coil coating
Cr
Coating of aircraft
Various EN standards available (e.g. EN ISO 11885, EN ISO 17294-2, EN ISO 15586)
Coil coating
Ni
Coating of vehicles
Coil coating
Zn
Coating of vehicles
Coil coating
AOX
Coating of vehicles
EN ISO 9562
Coil coating
Coating and printing of metal packaging (only for DWI cans)
F-
Coating of vehicles
EN ISO 10304-1
Coil coating
Coating and printing of metal packaging (only for DWI cans)

---
Source: https://www.legislation.gov.uk/eudn/2020/2009/annex/division/1/division/1.1/division/1.1.9/division/1.1.9.3/division/BAT (the official version)
Page: https://openlegislation.uk/eu-decision-2020-2009/annex/division-1/division-1.1/division-1.1.9/division-1.1.9.3/division-BAT
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

