{
  "url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-2/division-2.3/division-BAT",
  "json_url": "https://openlegislation.uk/eu-decision-2020-2009/annex/division-2/division-2.3/division-BAT.json",
  "legislation": "eudn/2020/2009",
  "legislation_title": "Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-decision-2020-2009",
  "path": "annex/division/2/division/2.3/division/BAT",
  "kind": "division",
  "number": "BAT 33",
  "heading": "In order to increase resource efficiency and to reduce the environmental impact and risk associated with the use of treatment chemicals, BAT is to reduce their consumption by using all of the techniques given below.",
  "text": "Technique\nDescription\nApplicability\n(a)\nUse of an efficient preservative application system\nApplication systems where the wood is immersed in the preservative solution are more efficient than, for example, spraying. The application efficiency of vacuum processes (closed system) is close to 100 %. The selection of the application system takes into account the use class and the penetration level needed.\nOnly applicable to new plants or major plant upgrades.\n(b)\nControl and optimisation of the consumption of the treatment chemicals for the specific end use\nControl and optimisation of the consumption of the treatment chemicals by:\n(a) weighing the wood/wood products before and after impregnation; or\n(b) determining the amount of preservative solution during and after impregnation.\nThe consumption of the treatment chemicals follows suppliers’ recommendations and does not lead to exceedances of the retention requirements (e.g. set in product quality standards).\nGenerally applicable.\n(c)\nSolvent mass balance\nThe compilation, at least once every year, of organic solvent inputs and outputs of a plant as defined in Part 7(2) of Annex VII to Directive 2010/75/EU.\nOnly applicable to plants using solvent-based treatment chemicals or creosote.\n(d)\nMeasurement and adjustment of wood moisture before treatment\nWood moisture is measured prior to treatment (e.g. by measuring the electric resistance or by weighing) and adjusted if needed (e.g. by further seasoning of the wood) in order to optimise the impregnation process and ensure the required product quality.\nOnly applicable if wood with a specific moisture content is needed.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudn/2020/2009/annex/division/2/division/2.3/division/BAT",
    "retrieved_at": "2026-11-01T15:12:03.527850+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}